Kelco TW Series 25mm 316ss Trailing Wire Sensor Poly Flow Switch with Manual Override

Land and Water Technology Verified independent store

→

Kelco TW Series 25mm Trailing Wire Sensor Poly Flow Switch DOWNLOAD PRODUCT BROCHURE INSTALLATION MANUAL The Kelco TW Series Trailing Wire Flow Switch is a robust, heavy-duty flow sensing solution for challenging applications where solids, slurries, or high-velocity flows make conventional paddle switches unsuitable. Using a flexible 2mm stainless steel wire sensor, the TW Series is ideal for open discharge points or pipe sizes from 50mm upwards. Available with either an all-polypropylene process connection (18 bar rated) or a high-pressure 316 stainless steel process connection (400 bar rated), and with 1" BSP or NPT threads, the TW can be configured to suit a wide range of installations. The TW-H models feature a 500V AC, 15A SPDT microswitch for general control circuits and include a manual override for testing and commissioning. The TW-RL models use an SPDT dry contact reed switch for low-voltage PLC, telemetry, and intrinsically safe hazardous area applications (when isolated via a Zener barrier). The modular design allows the electrical module to be removed without disturbing pipework. Wire lengths from 50mm to 300mm are available, and can be trimmed for optimal performance—ends must be silver-soldered or TIG-welded after trimming to prevent fraying. FEATURES Australian-made trailing wire type flow switch Flexible stainless wire sensor – ideal for slurries, sewage, mining, and high-velocity flows All-polypropylene or 316SS process connection options 1" BSP or NPT thread TW-H: SPDT 500V AC 15A microswitch with manual override TW-RL: SPDT dry reed switch for low-voltage PLC/telemetry/hazardous area use Wire lengths from 50mm to 300mm – adjustable for sensitivity Seal-less magnetic drive for durability IP67 weatherproof housing High-pressure stainless model rated to 400 bar; poly model rated to 18 bar APPLICATIONS Slurry and mining pipelines Sewage and wastewater pumping Open channel discharge points High-velocity industrial liquid flows Pump protection and automation Hazardous area flow detection (RL models) SPECIFICATIONS Process connection: 1" BSP or NPT Wire material: 2mm stainless steel Max pressure: 18 bar (poly), 400 bar (316SS) Max temp: 60°C (poly), 80°C (316SS) Switch type: TW-H: SPDT microswitch, 5–500V AC, 15A max resistive load TW-RL: SPDT reed switch, 20W/VA max, 140V AC / 150V DC, 1A max IP rating: IP67 Wire length options: 50, 80, 100, 140, 160, 180, 200, 250, 300mm Wire Trimming Calculator Paddle Trimming Calculator As with our Paddle Flow Switches, the Trailing Wires for our TW Series can be cut down in length to suit your pipework if needed. Please refer to our Paddle Trimming Calculator to find the correct wire length for your application. The width of the wires is 2mm. Please note that if you do cut down the length of your trailing wire, you must either silver solder or tig weld the end of the wire to prevent fraying. Show more