The Kimberley2Cape cam lock straps are an easy and convenient way to secure your gear for transit. Why tie lots when you can't tie knots... the Kimberley2Cape cam lock straps provide fast and easy tension to lock down your load. Operating Instructions Pass tail end of strap through an anchor point adjacent to the load to be secured. Pull strap through and pass over or through the load to be secured. Pass tail end of strap through an anchor point adjacent to the load but on the opposite side of the first anchor point used and return the tail end of the strap back to the buckle. Feed tail through the cam lock buckle by pressing down on the buck release tab with your thumb to open. Pull the tail up to tension the strap checking positioning of the strap as you go. Before tensioning completely inspect alignment and path of strap and apply a barrier between any sharp edges or points and the strap to prevent cutting or chaffing. Firmly tension the strap to adequate holding pressure for the item being restrained. Pass the loose tail end of the strap around the tensioned strap feeding into the cam lock buckle and apply 2 x half hitches around the tensioned strap cinching down each half hitch to lock the strap off. Recommendations To avoid cutting or chaffing of the strap ensure the strap does not pull up on or rub against sharp or abrasive edges without adequate barrier protection. Once the strap is tensioned, pass the loose tail end of the strap around the tensioned strap feeding into the cam lock buckle and apply 2 x half hitches around the tensioned strap cinching down each half hitch to lock the strap off. Disclaimer These straps are designed for securing supported loads up to 200kg. These straps should not be used to secure items the exceed 200kg or if doubt arises about the size, shape, weight or location of the item to be secure. Sale & purchase is subject to Terms Of Service policy
