Klein Tools, 1647728, Distribution Grip, 5000 lb Max Load, For HDPE-Coated Cable, 0.162 to 0.883 in Diameter

Fasteners Inc Verified independent store

→

Klein Tools' Wide Range Distribution Grip for Tree Wire was specifically designed to securely pull slippery HDPE-coated cable as known as tree wire or fire wire. Holds a wide range of cable sizes from 0.162-Inch to 0.883-Inch (4.11 to 22.42 mm). This versatile, one-handed actuation grip is 50-Percent lighter than the Klein's KT4600 grip with easy. Made in the USA, this grip has a maximum safe load of 5000-Pound (2268 kg).Warnings Do not exceed rated capacity. When used on/or near energized lines, ground, insulate, or isolate grip before pulling. Grips are to be used for temporary installation, not for permanent anchorage. Always match proper size and type of grip to application. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. Features Patent pending design One-Handed Grip Max Safe Load of 5000-Pound (2268 kg) Spring closes grip on cable to hold the initial position Securely pulls HDPE-coated cable commonly known as tree wire or fire wire; holds cable sizes from 0.162-Inch to 0.883-Inch (4.11 to 22.42 mm) Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks One-handed design makes for easier actuation Made in the USA 50-Percent lighter than the KT4600 grip Maximum Safe Load: 5000 lb (2268 kg) Cable Diameter: 0.162 to 0.883 in (4.11 to 22.42 mm) Overall Length: 10.25 in (26 cm) Depth: 10 in Width: 6.5 in Overall Height: 8 in (20.3 cm) Jaw Length: 3.31 in (8.4 cm) Overall Width: 1.75 in (4.4 cm) Height: 1.25 in Teeth Type: Grit Jaw Type: Round Type: Parallel Jaw Grip Spring: Yes Locking Handle: No Hot Latch: No Swing Latch: No Cable Type: HDPE-Coated, PVC-Coated, Weatherproof Material: Steel Material Compatibility: HDPE-coated cable (tree wire) Weight: 2.9 lbs (1.3 kg) Application: Wire Pulling Jaw Color: Silver Compliance: Made in USA DownloadsSpec Sheet Show more