Klein Tools' Insulated Screwdrivers feature a bright orange coating of flame and impact resistant insulation to protect against electrical shock. These tools exceed the ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000V rating symbol. The tether hole in the handle provides added safety when working at height. Available in 4-Inch and 6-Inch round shanks with a variety of tips.Warnings Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source. Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source. Keep tool clean, dry and free of any surface contaminants. Always inspect your tools before use. Whenever possible, always de-energize lines and equipment prior to working on or around them. Features Insulated screwdriver with a 4-Inch (10 cm) round shank, #2 Square tip Meets or exceeds ASTM F1505-16(2021) and IEC 60900:2018 Made in the USA Cushion-Grip™ handle for greater torque and comfort Tip-Ident® quickly identifies the screwdriver tip orientation so you can easily engage the screwdriver tip with the screw 1000V rated screwdriver features a layer of bright orange impact and flame resistant insulation to protect from electrical shock Tether hole for added safety when working at height Flame Retardant and Impact Resistant Handle Voltage Rating: 1000 V Standard: ASTM F1505-16 (2021), IEC 60900:2018 Overall Length: 8.32 in (21.1 cm) Overall Width: 1.24 in (3.2 cm) Overall Height: 8.32 in (21.1 cm) Depth: 8.25 in Width: 1.25 in Height: 1.25 in Tip Type: Square Tip Size: #2 Square Shank Type: Round Shank Length: 4 in (10.2 cm) Handle Length: 4.31 in (10.9 cm) Handle Diameter: 1.24 in (3.2 cm) Material: Steel, Plastic, impact and flame resistant insulation Handle Color: Black Weight: 0.1500 lbs Magnetic: No Insulated: Yes Type: Driver Safety Feature: Tether hole DownloadsSpec Sheet