The Konica Minolta KM1024 MHB is a genuine original shear-mode piezoelectric printhead delivering 1024 nozzles, 14pl drop size, and 8-level greyscale capability in a single head. Its integrated heater makes it the preferred choice for UV-curable inks, while remaining fully compatible with solvent and oil-based inks. The KM1024 MHB includes the Head ID and necessary waveform information and carries a manufacturer warranty. Every KM1024 MHB we sell at Digiprint USA is 100% genuine Konica Minolta original. Technical Specifications Specification Detail Model KM1024 MHB (also known as KM1024 MH) Technology Shear mode piezo on-demand (shared wall 3-cycle) Nozzles 1,024 nozzles (512 nozzles × 2 lines) Native resolution 360 dpi (180 dpi × 2 lines) Drop size 14 picoliters Greyscale Binary and 8-level greyscale modes Max firing frequency 12.8 kHz Print width 72mm Integrated heater Yes — ideal for UV inks, suitable for solvent inks Ink compatibility UV-curable, solvent, oil-based inks Head ID Included with waveform information Dimensions W131mm × D18mm × H89mm Weight 150g Condition 100% genuine original Konica Minolta, manufacturer warranty included KM1024 MHB vs KM1024 MNB — What is the Difference? Spec KM1024 MHB (this listing) KM1024 MNB Nozzles 1,024 1,024 Drop size 14 pl 14 pl Integrated heater Yes — MH = Micro Heater No — MN = standard Best for UV inks, solvent inks Solvent, oil-based inks The MH in KM1024 MHB stands for Micro Heater — the integrated heater is what enables the MHB to handle UV-curable inks effectively, as UV inks typically require heated printheads for optimal jetting. If your printer uses UV inks, the MHB is the correct choice. For solvent-only printers the MNB is also compatible. Contact our team if you are unsure which variant your printer requires. KM1024 vs KM512 — Why the Upgrade Matters The KM1024 MHB offers significant advantages over the older KM512 series: double the print width (72mm vs 36mm), double the greyscale levels (8-level vs 4-level), lower operating voltage through a new actuator design, and reduced power consumption. For wide-format UV and solvent production environments, the KM1024 delivers considerably higher throughput and image quality than any KM512 variant. Compatible Printers UV Flatbed and UV Roll-to-Roll: Dilli Neo Titan UV-1604DS, Dilli Neo Titan UV-1604DW, Dilli Neo UV-LED Flatbed, IIJ ColourPrint series, and other wide-format UV printers specifying KM1024 MHB compatibility Contact our technical team with your printer make and model to confirm KM1024 MHB compatibility before ordering. The KM1024 MHB includes a Head ID — compatibility with your printer's board must be verified. Why Buy from Digiprint USA • 100% genuine original Konica Minolta KM1024 MHB — not compatible, not refurbished • Includes Head ID and waveform information — required for printer board pairing • Manufacturer warranty included • In stock in Doral, Miami FL — same day shipping before 2PM EST • Ideal for Latin American UV print shops using Miami freight forwarders • Free technical support — we confirm KM1024 MHB vs MNB compatibility before you order View our full range of genuine Konica Minolta and industrial printheads stocked by Digiprint USA. Frequently Asked Questions What is the difference between KM1024 MHB and KM1024 MNB?The MHB has an integrated micro heater — MH stands for Micro Heater. This makes the MHB ideal for UV-curable inks which require a heated printhead for optimal jetting. The MNB has no heater and is suited for solvent and oil-based inks. Both have the same 1,024 nozzles and 14pl drop size. If your printer uses UV inks, order the MHB. If solvent only, contact our team to confirm which variant your printer requires. Why does the KM1024 MHB include a Head ID?The Head ID is a chip embedded in the printhead that communicates with the printer's control board. It includes waveform data — the electrical firing profile specific to that head. The printer reads the Head ID on installation to configure itself correctly for that printhead. Without the correct Head ID the printer will not recognise the head. All genuine KM1024 MHB heads include the Head ID and waveform data. How does the KM1024 MHB compare to the KM512 series?The KM1024 MHB doubles the print width of the KM512 (72mm vs 36mm) and offers 8-level greyscale versus 4-level on the KM512 MH. The new actuator design also reduces power consumption. For production environments the KM1024 delivers significantly higher throughput and image quality. What inks are compatible with the KM1024 MHB?The KM1024 MHB is primarily designed for UV-curable inks thanks to its integrated heater. It is also compatible with solvent and oil-based inks. The heater can be operated or bypassed depending on the ink type. Always use ink formulations approved for KM1024 MHB by your printer manufacturer. Do you ship Konica KM1024 printheads to Latin America?Yes — same day shipping from our Doral, Miami FL warehouse. Our Miami location is ideal for Latin American UV and solvent print shops using freight forwarders in the Doral area.
