Kramer Electronics CA-USB3/AAE USB 3.0 Active Extender Cable FEATURES Enables USB cable up to 15m (50ft) No external power needed Plug and play Available lengths — 3 to 15.2m (10 to 50ft) CA−USB3/AAE is an active extender cable designed to extend USB 3.0 signals. Typically, USB cables have a maximum length of about 2 meters (6 feet), CA−USB3/AAE enables cable lengths of up to 15m (50ft).This bus−powered cable contains active electronics that enables it to extend without any signal loss or potential performance problems. With no need for an external power source, CA−USB3/AAE is suitable for use with USB cameras‚ printers‚ webcams, keyboards, mice, and more.Note: This cable is for data transfer only, not for charging. Key Features True Plug–and–Play — No additional drivers needed. USB 3.0 Super Speed (5Gbps) Standard — Compliant with USB 3.0. High–Quality Construction — 2 pair 24AWG + 1 pair 26AWG + 2 wires 22AWG + 2 drain wires 24AWG. No External Power — Pulls power from the USB source device. Buffers Incoming & Outgoing Signal. CM–c(ETL) Rated. Varied Selection of Lengths — Available in versions of 4.6 to 15m (15 to 50ft). SPECIFICATIONS General TYPE: USB 3.0 SuperSpeed MAX. DATA RATE: 5 Gbps USB Features Integrated USB Hubs CA–USB3/AAE — 10ft to 15ft: 1 Tier Integrated USB Hubs CA–USB3/AAE — 25ft to 35ft: 2 Tiers Integrated USB Hubs CA–USB3/AAE — 50ft: 3 Tiers PHYSICAL CONNECTOR A: USB 3.0 type–A male CONNECTOR B: USB 3.0 type–A female MECHANICAL Cable Bending Radius 70mm CONDUCTORS Cable Composition: 2 pair 24AWG + 1 pair 26AWG + 2 wires 22AWG +drain wires 24AWG 24AWG: STP cable, bare solid copper, FEP insulation, 1.35mm OD, shielded — AL–Foil/Mylar and Mylar tape, both with 25% min. overlap 26AWG: Bare stranded copper, HD–PE insulation, 0.9mm OD 22AWG: Bare stranded copper, SR–PVC Insulation, 1.25mm OD, shielded with AL–Foil/Mylar — 25% min. overlap and tinned strand copper — 80% min coverage JACKET Material: PVC O.D.: 7mm Color: Black Power 15ft and 25ft length 4.4W 35ft length 4W 50ft length 3.5W Environmental Conditions Working temperature –10℃~+55℃