Key Features Fast Setup Tool-free installation lets you drop the base into place, lock it down, and move it when the job changes. That makes it easy to add clamping wherever you need it without dedicating a permanent station. 360 Degree Swivel The base rotates a full 360 degrees so you can aim clamping pressure where it helps most. That is useful when your workpiece, bench layout, or assembly angle is less than ideal. Bench Clamp Ready This clamp base is built to work with any Kreg Bench Clamp and fits work surfaces with 3/4 inch or 20 millimeter bench dog holes. It is a simple way to turn more tables and benches into useful clamping stations. Overview The Kreg KBCBA Bench Clamp Base is a clamp accessory designed for turning a workbench, assembly table, or shop surface into a movable clamping station. This is a bench clamp base designed for securing compatible Kreg bench clamps to a work surface. Model Number: KBCBA. If you already use Kreg bench clamps and want more flexibility without bolting down a permanent fixture, this is the piece that makes that setup quick and practical. What matters here is how fast it goes from stored away to ready for work. The tool-free installation uses an anchor bolt and locking knob so you can mount the base in seconds, remove it just as fast, and move it to a better spot when the task changes. On a real bench, that means less time messing around with hardware and more time holding parts where you need them for drilling, sanding, assembly, or light fixture work. The 360 degree swivel is not just a nice extra. It gives you freedom to place clamping pressure from the direction that makes sense for the workpiece instead of being stuck with a fixed position. That is especially useful on crowded benches, when working near an edge, or when you need to keep a panel, trim piece, or small assembly steady without fighting the layout of the bench. Kreg built the base with a cast-aluminum body for durability, backed by a heavy-duty anchor bolt for repeated setup and removal. That combination matters because a clamp base takes stress at the bench surface, not just at the clamp itself. The aluminum construction keeps the base light and easy to handle, while still giving it the toughness needed for regular shop use. Compatibility is one of the biggest selling points. The Kreg KBCBA Bench Clamp Base works with any Kreg Bench Clamp, so it is not a one-clamp-only accessory. It is also designed to fit work surfaces with standard 3/4 inch or 20 millimeter bench dog holes, which makes it a natural fit for many woodworking benches, multifunction tops, and mobile workstations. If your surface does not already have the right hole, Kreg states you can drill your own and use the base there. This accessory also makes sense if you want more out of a portable or shared workspace. Instead of dedicating one part of the bench to clamping full-time, you can install the base only when needed and clear the surface when you are done. That is a real advantage in smaller shops, garages, jobsite setups, and mobile workstations where space disappears fast. Who should buy it? Woodworkers, cabinet installers, trim carpenters, and serious DIY users who already own or plan to use a Kreg Bench Clamp will get the most from it. If you want a simple way to add repeatable bench-top clamping without a permanent mount, this base is the right kind of accessory. If you do not own a compatible Kreg Bench Clamp yet, just know the base is only part of the setup and the clamp is sold separately. Set Up a Clamping Point Almost Anywhere This base is made for users who do not want to be locked into one clamping location. Drop it into a compatible hole, tighten it by hand, and you have a stable spot for a Kreg bench clamp where the job actually needs it. Tool-free installation makes setup, removal, and repositioning quick Works on surfaces with 3/4 inch or 20 millimeter bench dog holes, or a drilled mounting hole Direct Clamping Pressure Where It Helps The swivel design gives you more freedom than a fixed mount. That matters when you are working around large panels, awkward assemblies, or tight bench layouts and still need the clamp to push from the right angle. Base swivels 360 degrees for flexible clamp positioning Useful for assembly, sanding support, holding trim, and general bench work Keeps the Setup Light but Jobsite Tough A bench accessory like this needs to be easy to handle, but it also needs to stand up to repeated use. The cast-aluminum base and heavy-duty anchor bolt are there for exactly that reason. Cast-aluminum construction is built for repeated mounting and removal Heavy-duty anchor bolt helps the base stay secure during clamping tasks What's in the Box (1) Cast-aluminum Bench Clamp Base (1) Anchor bolt (1) Plastic knob with nut Clamp sold separately. Key Specifications Model Number KBCBA Material Cast-aluminum base with plastic knob Bench Dog Hole Compatibility 3/4 in or 20 mm Rotation 360 degrees Clamp Compatibility Works with any Kreg Bench Clamp Clamp Type Specialty Weight 0.5 lbs Warranty 30 Day Compatibility Clamp Platform Works with any Kreg Bench Clamp. Work Surface Fit Designed for work surfaces with 3/4 inch or 20 millimeter bench dog holes. Custom Mounting Can also be used on a work surface where you drill the required hole yourself. Built For Woodworking Cabinet Assembly Trim Work Workbench Clamping Mobile Workstations DIY / Hobbyist Pro Tip If your bench has several dog holes, test the clamp base in a few positions before locking it down for repeated work. A small change in location can give you better access for the clamp handle and keep larger panels from hanging up on the bench edge. Warranty & Support 30 Day warranty. Tool Nut's Take Tool Nut's Take Why the Kreg KBCBA Bench Clamp Base Earns Its Spot This is a smart little accessory that solves a real shop problem: getting solid bench clamping exactly where you need it without committing to a permanent mount. Who it's for: Woodworkers, installers, and DIY users who already run a Kreg Bench Clamp and want more flexibility from their bench or mobile workstation. Why it stands out: The tool-free setup, 360 degree swivel, and fit for standard 3/4 inch or 20 millimeter dog holes make it much more useful than a fixed clamping point. Worth knowing: This is not a complete clamp by itself. It is the mounting base only, so you will need a compatible Kreg Bench Clamp if you do not already have one. Common Questions What clamps does this base work with? It works with any Kreg Bench Clamp. What size holes does it fit? It is designed for 3/4 inch or 20 millimeter bench dog holes. Can I use it on a bench without dog holes? Yes. Kreg states you can drill a hole in the work surface and attach the base there. Does the base rotate after installation? Yes. The base can swivel 360 degrees to position clamping pressure where you need it.
Related
Related
Related
Related