Key Features .005 in. Precision When you need the fence exactly where you want it, this adjuster lets you make fine moves down to .005 inch. That means less trial and error and more confidence on finish cuts and repeat setups. Thumb Wheel Control The thumb wheel gives you simple one-hand adjustment, so dialing in a band saw fence setting feels controlled instead of fussy. Small changes are easy to make without overshooting. Made for Kreg Fence This is not a generic add-on. It is built for use with the Kreg Precision Band Saw Fence, which matters if you want clean fit, straightforward installation, and predictable fence adjustment. Overview The Kreg KMS7215 Micro Adjuster is a fence adjustment accessory for band saw setup work. This is a micro adjuster designed for precise band saw fence positioning. Model Number: KMS7215. If you already use a Kreg Precision Band Saw Fence and want finer control than a standard slide-and-lock adjustment gives you, this is the add-on that helps you sneak up on the cut instead of bumping past it. The main reason this accessory matters is its adjustment resolution. Kreg rates it for adjustments as small as .005 in. (0.127 mm), which is the kind of fine movement that helps when you are setting up for accurate ripping, resawing, or repeat cuts where a little fence drift makes a real difference. Instead of loosening and nudging the fence by feel, you can turn the thumb wheel and make controlled, measurable changes. Kreg kept the operation simple. The thumb wheel layout is easy to understand and easy to use, which is exactly what you want on a fence accessory. A micro adjuster only earns its keep if it saves time instead of adding extra setup hassle, and the whole point here is faster, more repeatable fence dialing when you are chasing an exact setting. In practical shop use, this kind of accessory is most helpful after you have the fence roughly in place. Get close with the main fence adjustment, then use the micro adjuster for the last bit of movement. That is where it pays off. It reduces the back-and-forth of test cuts and small corrections, especially when you are working on parts that need consistency from one piece to the next. Compatibility is straightforward and important: this accessory is intended for use with the Kreg Precision Band Saw Fence. That clear platform match is a big deal, because precision accessories only work well when the fit and movement are predictable. If you are already invested in that Kreg fence system, the KMS7215 adds a more refined level of control without changing the basic way you work. This is best suited for woodworkers, cabinet builders, serious hobbyists, and anyone who uses a band saw for more than rough stock breakdown. If your work depends on accurate fence setup and repeatability, the Kreg KMS7215 Micro Adjuster is a smart add-on. If you only make rough cuts and rarely touch the fence once it is set, you may not need it. But if you care about dialing in a cut instead of settling for close enough, it makes a lot of sense. Dial In Fine Fence Moves Fine tuning a band saw fence by hand usually means moving it too far, backing it up, and trying again. This accessory solves that by giving you controlled micro adjustment right on the fence system. Adjustment capability down to .005 in. (0.127 mm) Designed specifically for the Kreg Precision Band Saw Fence Simple Control With One Hand The thumb wheel is the feature that makes this accessory useful day to day. Small, repeatable fence changes are easier to make when the control feels direct and deliberate instead of loose and approximate. Thumb wheel design makes fine adjustment quick and easy Built as a compact add-on that integrates with the fence rather than getting in the way What's in the Box (1) Kreg Micro Adjuster (1) Owner's Manual Key Specifications Adjustment Increment .005 in. (0.127 mm) Compatible Fence Kreg Precision Band Saw Fence Model KMS7215 Weight (lbs) 0.3 lbs Material Metal Product Type Micro Adjuster Compatibility Fence System Designed for use with the Kreg Precision Band Saw Fence. Built For Woodworking Band Saw Setup Fence Adjustment Repeat Cuts Resawing Setup Cabinet Work Pro Tip Set the fence close with the main adjustment first, then use the micro adjuster for the final movement. That is the fastest way to take advantage of the .005 inch control without dragging out setup time. Tool Nut's Take Tool Nut's Take Kreg KMS7215 Micro Adjuster for Woodworkers Who Want the Fence Exactly Right The Kreg KMS7215 Micro Adjuster is one of those small accessories that makes a good fence setup feel a whole lot more precise. Who it's for: Woodworkers and serious DIYers using the Kreg Precision Band Saw Fence for accurate ripping, resawing, and repeat setups. Why it stands out: The real value is the .005 inch adjustment capability and the simple thumb wheel control. It gives you a more controlled way to sneak up on the cut. Worth knowing: This is a focused add-on, not a universal accessory. It makes the most sense if you already own the matching Kreg fence and care about fine tuning. Common Questions What does this accessory do? It provides fine adjustment for a compatible band saw fence so you can make small, controlled position changes instead of moving the fence by hand alone. How precise is the adjustment? Kreg states that it can make adjustments down to .005 in. (0.127 mm). What is it compatible with? It is designed for use with the Kreg Precision Band Saw Fence.
