Key Features Repeatable Stops Sets a consistent stopping point on your router table fence so you can make repeat cuts without creeping up on the mark every time. Low-Profile Build The aluminum body stays compact at the fence, giving you a durable stop that does its job without getting in the way of stock movement. Flip-Away Convenience When you need the full fence again, the Kreg PRS7850 Precision Router Table Stop flips out of the way instead of forcing you to remove and reinstall it. Overview The Kreg PRS7850 Precision Router Table Stop is a router table stop designed for accurate, repeatable fence positioning during routing work. Model Number: PRS7850. If you are doing repeat cuts, stopped dado work, or any operation where stock needs to land in the same place every time, this accessory gives you a simple way to dial that in on a Kreg router table setup. What matters here is not just that it adds a stop, but how it improves workflow. Instead of measuring and resetting for every part, you can establish a stop position and run matching pieces with better consistency. That is the kind of upgrade that saves time in cabinet parts, trim work, template-based routing, and small production runs where accuracy and repeatability matter more than speed alone. Kreg built this stop with a low-profile aluminum design, which is the right call for router table work. It keeps the stop durable without creating a bulky obstruction along the fence. When you are moving panels, narrow stock, or edge profiles across the table, a low-profile stop is easier to work around and less likely to interfere with your hand position or material control. Another useful detail is the flip-away design. On the job or in the shop, accessories that require full removal tend to get left off once they slow the setup down. This one flips out of the way when not in use, so you can go from stop-based routing back to open-fence work quickly. That makes it more practical for real routing tasks where setups change often. The included Precision Lens Cursor is there for a reason. It gives you a clearer, more accurate view of the fence tape, which helps when you are fine-tuning stop position instead of guessing at the mark. For anyone trying to keep joinery, grooves, or repeated edge details consistent, that extra visibility is a real benefit. Compatibility is straightforward. This stop is made for the Kreg Precision Router Table, and supplementary source data also states it can be used with the Kreg Precision Benchtop Router Table when paired with the required adaptor kit for Model PRS2000. That makes it a good fit for woodworkers already invested in the Kreg router table platform rather than a universal router fence accessory. This accessory makes the most sense for woodworkers, cabinet builders, trim carpenters, and serious DIY users who want more control from a router table fence. If your work includes repeatable routing tasks and you already run a compatible Kreg table, this is a smart add-on. If you need a universal stop for non-Kreg fences, this is not that product and it should be bought specifically for the Kreg system it is designed around. Make Repeat Routing More Consistent If you are batching parts, matching grooves, or setting a fixed stopping point along the fence, this stop helps keep the workpiece landing where it should. That means less rechecking and fewer small setup errors that stack up across multiple parts. Designed to improve routing accuracy and repeatability Useful for repeat cuts and controlled fence-based router table work Stays Out of the Way When You Need the Fence Clear A stop is only helpful if it does not slow down the rest of your workflow. The flip-away design lets you move back to standard fence operations without removing the accessory, which keeps changeovers quicker in the middle of a project. Flips out of the way when not in use Low-profile aluminum construction helps reduce fence-side obstruction Dial In the Fence Setting More Clearly Small reading errors on a fence scale can throw off repeat work. The included Precision Lens Cursor gives you a clearer view of the fence tape so adjustments are easier to read and easier to trust. Includes Precision Lens Cursor for clear, accurate viewing Built specifically around Kreg router table fence measurement use What's in the Box (1) Precision Router Table Stop (1) Owner's manual Key Specifications Weight (lbs) 0.6 lbs Material Aluminum Dust Collection No Made In United States Compatibility Router Table Platform Compatible with the Kreg Precision Router Table. Benchtop Router Table Supplementary source data states use with the Kreg Precision Benchtop Router Table requires an adaptor kit for Model PRS2000. Built For Woodworking Cabinetry Trim Work Router Table Setup Repeat Cuts Fence Positioning Pro Tip Set the stop using a test piece first, then lock in the final position with the fence scale under the lens cursor. That gives you a physical reference and a readable setting, which makes it much easier to come back to the same routing setup later. Warranty & Support 30-day warranty type listed in supplementary source data. Tool Nut's Take Tool Nut's Take Kreg PRS7850 Precision Router Table Stop is a smart add-on for repeat work If you already own a compatible Kreg router table, this is the kind of small accessory that makes the setup feel more complete and a lot more repeatable. Who it's for: Woodworkers, cabinet guys, and serious DIY users doing repeat router table cuts on a Kreg setup. Why it stands out: The flip-away design, aluminum construction, and lens cursor make it useful in real workflow, not just on paper. Worth knowing: This is a Kreg-system accessory, not a universal router table stop, and benchtop compatibility may require an adaptor kit. Common Questions What does this accessory do? It adds a stop to a compatible Kreg router table fence to improve routing accuracy and repeatability. Is it compatible with the Kreg Precision Router Table? Yes. Source data states it is compatible with the Kreg Precision Router Table. Can it be used with the Kreg Precision Benchtop Router Table? Supplementary source data says yes, but an adaptor kit is required for Model PRS2000. What is it made from? The stop features a low-profile aluminum design.
