Key Features Repeatable Cut Lengths Set your measurement once and make matching parts without chasing a tape line every cut. That matters on miter saw stations, router tables, and fence setups where consistency is the whole game. Swings Out Fast The curved face lets material bump the stop and move past it when you need an unobstructed cut. You keep the stop close at hand instead of removing it and resetting later. Built for Kreg Trak This Kreg Tool KMS7801 Swing Stop is designed to work with Kreg Top Trak and Heavy-Duty Trak. It drops in from the top, so moving it to a new position is quick and simple. Overview The Kreg Tool KMS7801 Swing Stop is a track-mounted stop designed to give you repeatable cut and layout positions on shop fences and workstations. This is a saw stop accessory designed for repeatable measuring and stop positioning on cutting stations. Model Number: KMS7801. If you are building a miter saw station, tuning a band saw fence setup, or adding measured stops to a router table or table saw fence, this accessory helps you make accurate repeat cuts without resetting every board by hand. The big selling point here is control. The adjustable precision lens cursor uses a hairline indicator so you can dial in measurements exactly, then fine tune the stop to your specific fence setup. That means less guesswork when you are batching face frame parts, trim pieces, shelving parts, or production cuts. Instead of measuring every workpiece separately, you set the stop once and keep moving. Kreg also got the actual stop shape right. The curved face is designed so the stop can be bypassed easily when you want to cut without removing it from the track. Slide the board into the front of the curved foot and the stop pops up out of the way. On the bench, that saves time because you can go from repeated cuts to one-off cuts without breaking your flow or losing your setting. Construction matters on a stop like this because any flex turns into inconsistent parts. The KMS7801 uses rugged aluminum construction along with durable bushings that help keep the stop rigid and accurate. That is what separates a useful fence stop from one that drifts, deflects, or slowly turns into a rough reference point instead of a precise one. The design is adaptable too. The foot includes a small breakaway section so it can be modified to work on a fence with an auxiliary face. That is a practical detail for woodworkers who build their own stations instead of relying on one fixed factory setup. It is also designed to drop into the track from the top side, so repositioning or removing it is straightforward when you are changing operations. Compatibility is clear and important here: the Swing Stop is made for Kreg Top Trak and Kreg Heavy-Duty Trak. That makes it a smart add-on for anyone already using the Kreg measuring and fence system. It is not a standalone cutting tool. It is a workflow upgrade for shops that want faster setup, more consistent parts, and less wasted stock caused by small measurement errors. This accessory makes the most sense for woodworkers, cabinet installers, trim carpenters, and serious DIY users building repeatable cutting stations. If you only cut a random board once in a while, you may not need it. If you make multiples and care whether every piece matches, a solid swing stop like this earns its spot fast. Dial In Repeatable Accuracy When you are cutting multiple parts to the same length, this stop gives you a fixed reference point you can trust. That speeds up production work and helps keep assemblies square because the parts actually match. Precision lens cursor uses a hairline indicator for exact positioning Adjustable cursor lets you fine tune the stop to your specific tool setup Keep the Fence Clear When You Need To A stop is only useful if it does not get in your way the second you need a one-off cut. The curved face solves that problem by letting the material move past the stop without forcing you to remove and reset it. Curved foot allows the stop to be easily bypassed Good fit for mixed workflows where repeated cuts and single cuts happen back to back Built for Shop-Made Stations This stop is made to work as part of a fence system, not as a one-size-fits-all compromise. It drops into compatible track from the top and can be removed or repositioned quickly as your station changes. Compatible with Kreg Top Trak and Heavy-Duty Trak Breakaway foot section can be modified for fences with an auxiliary face What's in the Box (1) Kreg Swing Stop Mounting hardware Owner's manual Key Specifications Model Number KMS7801 Material Anodized aluminum Product Type Swing stop / fence stop accessory Power Source Hand powered Weight 10.8 oz Dimensions 1.63 x 8.88 x 5.88 in Measurement Cursor Precision lens cursor with hairline indicator Track Compatibility Kreg Top Trak and Heavy-Duty Trak Compatibility Track System Designed to work with Kreg Top Trak. Heavy-Duty Track Also compatible with Kreg Heavy-Duty Trak for custom fence and stop setups. Tool Applications Suitable for use on miter saw stations, band saw fences, table saw fences, router tables, and similar shop-built measuring stations when paired with compatible Kreg track. Built For Woodworking Cabinetry Trim Carpentry Miter Saw Stations Router Table Setups Table Saw Fence Stops Repeat Cuts DIY / Hobbyist Pro Tip After installing the stop on your track, use the adjustable lens cursor to calibrate it against a verified test cut, not just the tape on the fence. Once it is dialed in to your station, the KMS7801 becomes a true repeat-cut tool instead of just a rough stop. Tool Nut's Take Tool Nut's Take Why the Kreg Tool KMS7801 Swing Stop earns bench space This is a smart add-on for anyone who wants faster setups and cleaner repeatability from a shop fence system. Who it's for: Woodworkers, trim guys, cabinet builders, and serious DIY users building a measured cutting station around Kreg track. Why it stands out: The precision cursor gives you exact setup, and the curved swing-stop design lets you bypass the stop without tearing down your setting. Worth knowing: This is an accessory, not a standalone system. It really shines when you already have Kreg Top Trak or Heavy-Duty Trak and do repeat cuts often enough to care about shaving setup time. Common Questions What is the KMS7801 used for? It is used to create repeatable stop positions for accurate repeated cuts or setups on compatible tracked fences and shop stations. Which track systems does it fit? The Kreg Swing Stop is designed for Kreg Top Trak and Kreg Heavy-Duty Trak. Can it be used on more than a miter saw station? Yes. Kreg lists it for miter saw, band saw, table saw fence, router table, and other similar fence-based shop setups using compatible track. Can the stop be bypassed without removing it? Yes. The curved face is designed so the stop can be swung or pushed out of the way for unobstructed cuts.
Related
Related
Related
Related