The Krix Cyclonix 12 has taken its design cues from the subwoofer modules in the MX-10 modular wall of sound system, foregoing the acoustic absorbent material on the front baffle and instead offering an optional black cloth grille. The 305mm bass driver features a 50mm voice coil with a ventilated magnet system. The dual down-firing vents are tuned to achieve maximum output, while the proprietary Krix rubber feet provide improved acoustic isolation on hard and soft floor surfaces. The Cyclonix range of subwoofers is designed for edge-of-your-seat bass performance in dedicated home cinema rooms. Their shallow depth allows them to be placed inconspicuously against a side or back wall as supporting subwoofers to a Series MX system. They can also be used as the main subwoofers in a dedicated home cinema system – either behind an acoustically transparent screen or elsewhere in the room. A separate power amplifier is required for this subwoofer and can be connected to the LFE output of any AV processor or receiver. We recommend Krix subwoofers be paired with LEA amplification for the best performance results. Call for further information Krix Cyclonix 12 Features and Specifications: Supporting subwoofer for Series MX systems Can also be used as a primary subwoofer The shallow design allows for greater placement options This low-profile, passive subwoofer has been designed to deliver outstanding low-frequency performance as a supporting subwoofer for an MX-10, or as a standalone subwoofer in a Series SX system Specifications: Frequency Range25Hz-200Hz in-room response Amplifier Power200 – 500 Watts RMS recommended amplifier power Recommended ProcessingHigh Pass Filter: 30 Hz 24dB / Octave ButterworthLimiter: 500W (4 Ohms) InputsHigh current spring terminals featuring a 5mm hole to accept up to 10AWG cable Enclosure TypeBass reflex, dual down-firing vents Dimensions940mm high x 540mm wide x 190mm deep (210 mm deep with optional grille) Impedance4 Ohms Low-Frequency DriverNominal 305mm (12”) diameter paper cone driver with 50mm (2”) long-throw voice coil developed for high level, low-frequency reinforcement Sensitivity92 dB SPL (2.83V / 1m) Weight26 kg Download a specification sheet HERE
