The Krix LX-7 is a stylish, high-performance passive loudspeaker, custom-built in Australia for screen sizes 75 inches and above. Featuring left, centre and right channels, it can be combined with surround speakers and an AVR/processor to create a genuine, immersive cinema soundscape without the need for virtual or ‘bouncing’ effects. The sleek design requires minimal space above or below your screen. The LX-7 is intended to be combined with a Krix subwoofer(s) to accurately reproduce the lowest frequencies for the highest level of home cinema performance. Krix LX-7 Features: Tilting bracket Using the included bracket, the LX-7 can be mounted flush against the wall or at adjustable angles up to 15 degrees for optimal sound dispersion. Tonally matched The LX-7 is tonally matched to all Krix surround and overhead speakers. Unparalleled Sound Three 90 x 90 Krix short-throw waveguides significantly improve dispersion characteristics and increase efficiency for very high output levels. For the ultimate sound experience at home, play it through Krix! SPECIFICATIONS Frequency range 60Hz-20kHz in-room response Power handling50-250 Watts RMS recommended amplifier power Sensitivity92dB for 2.83 volts at 1 metre Impedance8 Ohms Configuration2-way Enclosure typeBass reflex, front vented, 12mm braced MDF DimensionsVarious – see specification sheet Low-frequency driverSingle 165mm (6 1/2”) paper cone. 50mm (2”) voice coil wound on high-powered Kapton former, with ventilated spider and aluminium flux stabilisation ring for low distortion High-frequency driver26mm (1”) doped fabric dome with a large roll surround. Ferrofluid cooled. Coupled with a Krix designed 90 x 90 short-throw waveguide Crossover point1.9kHz Input terminalsHigh current terminals featuring 5mm holes to accept up to 10 AWG cable WeightVarious – see specification sheet
Related
Related