(Model: KDPEX-3-140 Low-Profile) 140,000 LB CAPACITY, 3 AXLE, 54’- 10" LONG CLOSED, 78’- 6" OPEN Capacity: 140,000 lbs in 14' closed position (load in open position must be 2 point blocked / self-supporting), GAWR & tire rating determine legal loads. Overall Nominal Dimensions: 8’- 6” nominal wide X 54’- 10" nominal closed / 78’- 6" nominal open (12’- 10" upper deck / 42’- 0" lower deck closed with neck extension in up position). Gooseneck: Narrow neck with lugs / 118" flip neck extension / floor screen / removable chain tray. Upper Coupler: 2” pin / 16 setting / 50” fifth wheel height. Swing Clearance: 108” / 226" with 118" flip neck extension in down position Landing Gear: 2-speed landing gear with curbside crank handle Beams: 100,000-psi minimum yield flanges / 80,000 psi minimum yield webs / 20” deep main rails with fabricated side rails (upper flange reinforcement bars 12" long spaced 18" apart for chain end hooks). Cross Members: 4” junior I-Beams on 9" centers first 9' and last 9' of lower deck / 4" junior I-Beams on 12" centers balance of lower deck. Flex Track: Track between main beams to enclose and provide protected travel of air and electrical lines during extension / retraction without disconnecting / connecting lines. Stops: Air operated for extendable length with stops approximately 24" throughout. Rub Rail, Stake Pockets & Pipe Spools: None D-Rings: 11 pair (straight) mounted on top of bottom flange (outer beams) evenly spaced, 4 pair (straight) on ends of bolsters and 7 Pair (bent) on the fabricated side rail evenly spaced between reinforcement dars (position high on the side rail). Floor: 1-3/8” Apitong outside with screws every cross-member (every other cross member front 9' rear 9' of lower deck), 3/16" steel diamond plate center. Deck Height, Loaded: Front and rear of lower deck approximately 33" at rated capacity. Rear Lugs: Lugs on rear for future flip axle / spreader with air and electrical connections. Suspension: Ridewell Model 240 Air Ride / 55” spread / nylon shock straps. Lift Axle: Air bag cut off valve mounted in Bolster with axle chains on 1st axle.
