KSL1500X-BSA is a compact automatic bottom-loading furnace controlled by a laptop with a 6 x 6 x 6" heating chamber and max. working temperature of 1500 °C. The compact furnace can be placed in a standard glovebox and can be connected to a robot to achieve fully automated operation in an autonomous materials research laboratory. Cooling fans are installed in the lower chamber to cool off the sample when it is lowered from the heated chamber. SPECIFICATIONS Power 208 - 240 VAC, 50/60 Hz, single phase Max. Power: 6 kW Note: Power cable is included without plugs. The power plug would need to be installed by the user according to the lab requirements. KF40 feedthrough with a power cord for gloveboxes is available upon request at extra cost. Heating chamber 150mm(W) x 150mm(L) x 150mm(H), ( 6"x6"x6") 1500°C-grade SiC heating elements Capacity: 3 Liters or 0.1 cubic ft Thermocouple: S-type Furnace Opening Clearance 150 mm maximum Working Temperature 1400 °C, continuously 1500 °C, < 30 minutes Heating Rate: 10°C / minute Temperature Controller PID automatic control and auto-tune function 50 programmable segments for precise control Built-in protection for overheating or a broken thermocouple Large digital control panel (48 x 96 mm) for easy operation Temperature accuracy: +/- 1 °C Remote Computer Control Software(Optional at Extra Cost) Temperature profile: heating, dwell time, and cooling up to 50 segments with accuracy +/- 1°C The bottom door will be closed after sample loading and opened after the heating program is finished. RJ45 communication interface connects to a PC or a wireless router The communication protocol is open to existing customers, allowing the connection of equipment with robots for unmanned operation. Computer operation software is ONLY sold and pre-installed on a tested computer as a kit Controls multiple units at the same time Fast Cooling Cooling fans are installed in the lower chamber to cool off the sample when it is lowered from the heated chamber. Cooling rate may reach 20°C/Sec (1200°C/minute) Compliance NRTL or CSA certification is available upon request at an extra cost.
Related
Related
Related
Related