NOTE: The PB2 Industrial has FPP installed on the internal eMMC. No SD card is required. The K16-Pro is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 16 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 8 RJ45 differential ports that can output an additional 32 strings via differential receivers. Finally, it has two RS485 outputs for DMX, PixelNet, Renard, LOR. The K16-Pro has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb/s speed). The cape provides: 16 pixel connectors in banks for four. Each bank of four can use any voltage from 5V – 24V Each string can provide up to 5A of power 8 RJ45 connections for 32 more strings via differential receivers 2 RJ45 connections for DMX/LOR 3 USB-A connectors for WIFIi adapters or other USB devices On-board pcm5102 DAC and headphone jack for sound Header to attach FM transmitter Gigabit Ethernet Connector Expansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground Temperature sensor. Real Time Clock 5v 4-Pin PWM Cooling Fan Connector 8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality. You will need: PocketBeagle 2 – the K16-Pro will NOT work with a PocketBeagle 1 The latest FPP images can always be found at https://github.com/FalconChristmas/fpp/releases/ Power supply ws281x compatible pixels Mounting Information: https://kulplights.com/wp-content/uploads/2025/08/K16.pdf https://www.thingiverse.com/thing:7181496
Related
Related
Related
Related