Kulp PocketScroller V2 LED Panel Controller (with PocketBeagle) The Kulp PocketScroller V2 is a compact LED matrix controller designed specifically for driving HUB75 LED panels such as P5 and P10 matrices. Built around the PocketBeagle platform and powered by Falcon Player (FPP), it provides a powerful and affordable solution for animated panel displays, scrolling text, and video playback. Its compact form factor makes it ideal for smaller matrix builds while still supporting large panel counts and high refresh rates using the PocketBeagle PRUs for panel driving. Key features 6 × HUB75 panel output connectors Designed for P5 and P10 LED matrix panels Compatible with Falcon Player (FPP) Supports local sequence playback from SD card Supports E1.31 and DDP network input USB-A port for Ethernet or WiFi adapter Temperature sensor onboard 2 onboard push buttons for FPP menu navigation I2C OLED display header Open-source software and firmware Panel support Supports 1:4 scan P10 panels Supports 1:8 scan P5/P10 panels Supports 1:16 scan P5 panels Supports other HUB75 panels using 1:8 or 1:16 scan rates 1:32 scan panels are NOT supported Performance 6 HUB75 outputs Each output can drive more than 12 P10 1:8 scan panels Supports up to approximately 72 panels total depending on configuration and refresh rate Uses both PocketBeagle PRUs for high refresh rate output Connectivity USB-A connector for USB Ethernet or WiFi adapter Supports network-based control via E1.31 or DDP Compatible with xLights and other sequencing software Power 5V DC input via 3.5 mm screw terminal Powers the PocketBeagle, buffer chip, and USB bus Included in this package Kulp PocketScroller V2 cape PocketBeagle SD Card with FPP preloaded Required for operation (sold separately) USB Ethernet or compatible WiFi adapter HUB75 LED panels 5V power supply Notes The OLED display shares pins with HUB75 output 6. When using all 6 outputs, the OLED will display information at boot but will disable once FPP starts For continuous OLED operation, leave output 6 unused PocketBeagle2 compatibility is currently limited and may exhibit display ghosting/interference issues Designed for HUB75 LED matrix panels only
