Heating Element 2 prong 115V 1000W Fits: All Europiccola and Professionale models with single switch, pressurestat and bolt on Heating Element. DOES NOT fit 1978 & earlier machines with the screw-in element, however, you can use this flange to retrofit a stainless-steel bolt-on element onto a unit which originally used the screw-in element. Uses the P-7ss gasket. As will all heating elements, we strongly recommend that you replace the gasket when replacing the element. In addition, brittle wires and/or yellowed connector covers indicate overheating and can contribute to premature failure of components, such as switches. Please consider replacing the wires, connectors, and connector covers if needed on your unit. A selection of parts can be found in our Miscellaneous Electrical Parts section. For wires we suggest the 16 AWG, connectors, covers If you are replacing the old brass and copper element on your La Pavoni, there are additional parts you will need to complete this upgrade (see links below): P-7ss P-18ss (three pieces) P-14a P-16-1 NTE303 NOTE: The factory installs the pressurestat pipe (P-13) with thread sealant. It often takes enough force to remove it that it damages the pipe, so we recommend removing yours prior to ordering to see if you also need to replace the pipe. You may also need: P-13 P-14 Pressurestat (or 25332)
