Lanbao QE8 - field-wirable sensor connector The Lanbao QE8 is a field-wirable sensor connector built for field wiring and connector termination in industrial automation equipment. Lanbao's official specification lists Official Length field: 2m/5m; current listing includes selected 10m SKU variants. Verify exact SKU before ordering., Current listing SKU options: Lanbao-QE8-N3F; Lanbao-QE8-N4F; Lanbao-QE8-W3F; Lanbao-QE8-W4F, and 60VAC/DC. This OpenELAB listing describes the currently selectable SKUs, so pin count, output, cable length, interface, and any M-suffix variant should always be checked against the variant name before ordering. For selection, confirm the connector format, electrical rating, protection rating, material, cable or measuring range, and exact SKU before installation under real machine conditions. If you are comparing nearby Lanbao items, also review Lanbao QE12, Lanbao MS-ECT-SM12-0008-A, and Lanbao PDA-CC50 so the accessory, sensor, or master station matches the existing machine wiring and controller input. Technical Specifications Parameter Value Model family QE8 Product type field-wirable sensor connector Current SKU coverage Lanbao-QE8-N3F; Lanbao-QE8-N4F; Lanbao-QE8-W3F; Lanbao-QE8-W4F Core function field wiring and connector termination Range / length / interface Official Length field: 2m/5m; current listing includes selected 10m SKU variants. Verify exact SKU before ordering. Output / variant coverage Current listing SKU options: Lanbao-QE8-N3F; Lanbao-QE8-N4F; Lanbao-QE8-W3F; Lanbao-QE8-W4F Supply voltage 60VAC/DC Rated / nominal current 4A Connection / interface See selected SKU Protection rating IP67 Material PVC Cable / housing detail 4...5mm Temperature range -40°C...85°C Indicator / built-in function See official specification Board Layout & Label Guide Product marking - Match model QE8 and the selected SKU against the label, connector marking, or order line. Connection area - See selected SKU; route cable and connector strain relief before commissioning. Variant coverage - Current listing SKU options: Lanbao-QE8-N3F; Lanbao-QE8-N4F; Lanbao-QE8-W3F; Lanbao-QE8-W4F. Supply input - Operate only within 60VAC/DC. Indicator / label area - Use LED status or printed markings to confirm power, signal state, or selected function. Mechanical mounting - Install the connector, cable jacket, housing, or master station without bending, pulling, or twisting stress. Protection rating - IP67; keep mating surfaces and seals clean. SKU selection - Select pin count, cable length, output, interface, or M-suffix variant from the exact SKU. Packing List 1 x selected item FAQ Q: What is the main function of the Lanbao QE8?A: It is a field-wirable sensor connector for field wiring and connector termination. Q: Which variant should I order?A: Choose by current SKU coverage: Current listing SKU options: Lanbao-QE8-N3F; Lanbao-QE8-N4F; Lanbao-QE8-W3F; Lanbao-QE8-W4F. Q: Which length or measurement range applies?A: Use Official Length field: 2m/5m; current listing includes selected 10m SKU variants. Verify exact SKU before ordering. and the exact SKU on your order as the final reference. Q: Which power supply should I use?A: Use 60VAC/DC and confirm wiring before applying power. Q: Is the protection rating suitable for industrial equipment?A: The official protection rating is IP67; installation and mating connectors still matter. Q: Are all listed variants included together?A: No. The shipped item follows the selected store SKU, not every variant named in the family description. Q: What should I check before commissioning?A: Check SKU, pin count, output, supply voltage, cable strain relief, connector seating, and indicator state. Q: Where should final parameters be verified?A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.
