Lanbao PDB-CR85 - laser distance sensor The Lanbao PDB-CR85 is a laser distance sensor built for laser distance measurement in industrial automation equipment. Lanbao's official specification lists ±25mm, RS-485; 4...20mA (based on current SKU options), RS-485:10...30VDC;4...20mA:12...24VDC supply, and RS-485:2m 5pins PVC cable;4...20mA:2m 4pins PVC cable. This OpenELAB listing summarizes the product family for selectable SKUs, so always match the required output and connection against the variant name before ordering. For selection, confirm the sensing principle, range, output type, connection style, response time, protection rating, and accessory set against the exact SKU. Use the SKU code on the order page as the final reference for output polarity and cable style. If you are comparing nearby Lanbao models, also review Lanbao PDB-CM, Lanbao PDB-CC10, and Lanbao PDB-CC50 so the housing style, measurement method, and control output match the machine input. Technical Specifications Parameter Value Model family PDB-CR85 Sensor type laser distance sensor Detection / measuring range ±25mm Sensing method laser distance measurement Output configuration RS-485; 4...20mA (based on current SKU options) Supply voltage RS-485:10...30VDC;4...20mA:12...24VDC Response time 2ms/16ms/40ms Settable Light source Red laser(650nm);Laser level:Class 2 Load / output current 200mA Connection RS-485:2m 5pins PVC cable;4...20mA:2m 4pins PVC cable Protection rating IP67 Material Housing:plastic ABS;Lens cover:PMMA;Display panel:PC Operating temperature Operation temperature:- 10...+50℃ Indicator Power indicator:Green LED;Action indicator:Yellow LED Board Layout & Label Guide Laser emission and receiving window - Keep the active face clean and align it to the target path required by laser distance measurement. Output indicator - Use the LED indication to confirm power, switching state, and any short-circuit or overload warning described by the official specification. Connection area - RS-485:2m 5pins PVC cable;4...20mA:2m 4pins PVC cable; route the cable or connector with strain relief before final commissioning. Supply input - Wire the sensor only within RS-485:10...30VDC;4...20mA:12...24VDC; confirm polarity before applying power. Output selection - Match the selected SKU to this listing's output coverage: RS-485; 4...20mA (based on current SKU options). Adjustment / teach control - Use the controls described for the selected SKU; set the distance or threshold after the sensor is mounted in its final position. Mounting body - Use the listed accessory hardware and avoid mechanical stress on the lens, slot, or transducer surface. Protection rating - IP67; maintain sealing around the cable entry or connector during installation. Packing List 1 x Lanbao PDB-CR85 sensor for the selected SKU Screw(M4×35mm)×2、Nut×2、 Washer×2、Mounting bracket、Operation manual Product documentation and official specification reference Current store bundle contents may vary by SKU and warehouse batch FAQ Q: What is the main function of the Lanbao PDB-CR85?A: It is a laser distance sensor for laser distance measurement, with the range and output behavior defined by the selected SKU. Q: Which power supply should I use?A: Use RS-485:10...30VDC;4...20mA:12...24VDC and confirm the sensor wiring before applying power. Q: Which output type should I order?A: Choose the SKU that matches the controller input. Current output coverage for this listing is: RS-485; 4...20mA (based on current SKU options). Q: Does the sensing distance always equal the rated value?A: Use ±25mm as the official reference, then validate with the real target, mounting angle, and surface condition. Q: What should I check before commissioning?A: Check supply voltage, output wiring, target alignment, LED status, mounting stability, and the selected distance or teach setting. Q: Can I use it in wet or dusty equipment?A: The official protection rating is IP67. Keep the connector, cable outlet, and sensing face sealed as installed. Q: Is the product sold as all variants together?A: No. Select the required SKU from the store options; the title and description summarize the compatible product family. Q: Where should I verify final parameters?A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.
Related
Related
Related
Related