Lanbao MS ECT-SM12-0008-A - EtherCAT IO-Link master station The Lanbao MS ECT-SM12-0008-A is a EtherCAT IO-Link master station built for EtherCAT networked IO-Link expansion in industrial automation equipment. Lanbao's official specification lists 8*IOLINK, 16*PNP,3 type, and the required supply rating. This OpenELAB listing describes the currently selectable SKUs, so pin count, output, cable length, interface, and any M-suffix variant should always be checked against the variant name before ordering. For selection, confirm the connector format, electrical rating, protection rating, material, cable or measuring range, and exact SKU before installation under real machine conditions. If you are comparing nearby Lanbao items, also review Lanbao PDA-CC50, Lanbao PDA-CC100, and Lanbao PDA-CR30 so the accessory, sensor, or master station matches the existing machine wiring and controller input. Technical Specifications Parameter Value Model family MS ECT-SM12-0008-A Product type EtherCAT IO-Link master station Current SKU coverage Lanbao-MS-ECT-SM12-0008-A Core function EtherCAT networked IO-Link expansion IO-Link version 1.1 Network interface EtherCAT Auxiliary interface 8*IOLINK Digital input port 16*PNP,3 type Digital output port 16*PNP Interface class CLASS A EtherCAT interface Female, M12*2, 4pin, CLASS D Power input interface Male, 7/8", 5pin Power output interface Female, 7/8", 5pin IO interface Female, M12*8, 5pin, CLASS A Contact surface protection Nickel/gold plated Board Layout & Label Guide Product marking - Match model MS ECT-SM12-0008-A and the selected SKU against the label, connector marking, or order line. Connection area - Female, M12*2, 4pin, CLASS D; route cable and connector strain relief before commissioning. Variant coverage - 16*PNP,3 type. Supply input - Operate only within the official specification. Indicator / label area - Use LED status or printed markings to confirm power, signal state, or selected function. Mechanical mounting - Install the connector, cable jacket, housing, or master station without bending, pulling, or twisting stress. Protection rating - See official specification; keep mating surfaces and seals clean. SKU selection - Select pin count, cable length, output, interface, or M-suffix variant from the exact SKU. Packing List 1 x selected item FAQ Q: What is the main function of the Lanbao MS ECT-SM12-0008-A?A: It is a EtherCAT IO-Link master station for EtherCAT networked IO-Link expansion. Q: Which variant should I order?A: Choose by current SKU coverage: 16*PNP,3 type. Q: Which length or measurement range applies?A: Use 8*IOLINK and the exact SKU on your order as the final reference. Q: Which power supply should I use?A: Use the official specification and confirm wiring before applying power. Q: Is the protection rating suitable for industrial equipment?A: The official protection rating is listed in the specification; installation and mating connectors still matter. Q: Are all listed variants included together?A: No. The shipped item follows the selected store SKU, not every variant named in the family description. Q: What should I check before commissioning?A: Check SKU, pin count, output, supply voltage, cable strain relief, connector seating, and indicator state. Q: Where should final parameters be verified?A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.
