Lanbao PDA-CC50 - laser distance sensor The Lanbao PDA-CC50 is a laser distance sensor built for laser distance measurement in industrial automation equipment. Lanbao's official specification lists 80...500mm, RS-485; 4...20mA (based on current SKU options), and RS-485:10...30VDC; 4...20mA:12...24VDC. This OpenELAB listing describes the currently selectable SKUs, so pin count, output, cable length, interface, and any M-suffix variant should always be checked against the variant name before ordering. For selection, confirm the connector format, electrical rating, protection rating, material, cable or measuring range, and exact SKU before installation under real machine conditions. If you are comparing nearby Lanbao items, also review Lanbao PDA-CC100, Lanbao PDA-CR30, and Lanbao PDA-CR50 so the accessory, sensor, or master station matches the existing machine wiring and controller input. Technical Specifications Parameter Value Model family PDA-CC50 Product type laser distance sensor Current SKU coverage Lanbao-PDA-CC50DGR; Lanbao-PDA-CC50TGI Core function laser distance measurement Range / length / interface 80...500mm Output / variant coverage RS-485; 4...20mA (based on current SKU options) Supply voltage RS-485:10...30VDC; 4...20mA:12...24VDC Rated / nominal current 200mA Connection / interface RS-485:2m 5pins PVC cable;4...20mA:2m 4pins PVC cable Protection rating IP67 Material Housing:Aluminum;Lens cover:PMMA;Display panel:PC Cable / housing detail 65 x 51 x 23 mm Temperature range Operation temperature:-10...+50℃ Indicator / built-in function Power indicator:Green LED;Action indicator:Yellow LED Board Layout & Label Guide Product marking - Match model PDA-CC50 and the selected SKU against the label, connector marking, or order line. Connection area - RS-485:2m 5pins PVC cable;4...20mA:2m 4pins PVC cable; route cable and connector strain relief before commissioning. Variant coverage - RS-485; 4...20mA (based on current SKU options). Supply input - Operate only within RS-485:10...30VDC; 4...20mA:12...24VDC. Indicator / label area - Use LED status or printed markings to confirm power, signal state, or selected function. Mechanical mounting - Install the connector, cable jacket, housing, or master station without bending, pulling, or twisting stress. Protection rating - IP67; keep mating surfaces and seals clean. SKU selection - Select pin count, cable length, output, interface, or M-suffix variant from the exact SKU. Packing List 1 x Lanbao PDA-CC50 sensor for the selected SKU Screw(M4×35mm)×2、Nut×2、 Washer×2、Mounting bracket、Operation manual FAQ Q: What is the main function of the Lanbao PDA-CC50?A: It is a laser distance sensor for laser distance measurement. Q: Which variant should I order?A: Choose by current SKU coverage: RS-485; 4...20mA (based on current SKU options). Q: Which length or measurement range applies?A: Use 80...500mm and the exact SKU on your order as the final reference. Q: Which power supply should I use?A: Use RS-485:10...30VDC; 4...20mA:12...24VDC and confirm wiring before applying power. Q: Is the protection rating suitable for industrial equipment?A: The official protection rating is IP67; installation and mating connectors still matter. Q: Are all listed variants included together?A: No. The shipped item follows the selected store SKU, not every variant named in the family description. Q: What should I check before commissioning?A: Check SKU, pin count, output, supply voltage, cable strain relief, connector seating, and indicator state. Q: Where should final parameters be verified?A: Use the official Lanbao specification page and the SKU shown on your OpenELAB order.
