Features:Made of Aluminum material and Acrylic.The software is easy to use, free upgrades for life.Two-motor design more compact and more precise.Engraving object height was unlimited can be directly placed on top to work.Low light positioning, engraving preview, gray sculpture, contour carving, entity carvingCan be carving materials: Wood, plastics, paper, bamboo, horns, and some cortex (purse), cell phone plastic shell, rubber stamp, sponges, paperNon-carving materials:Metal (regardless of thickness), stone, ceramics, jewelery, reflective material, a colorless transparent material, soft materialDescription:Engraving Material Note:1.can engraving materials: wood, foam, bamboo, plastic, paper, thin leather, bank card,rubber.2.can not engraving material:metal,stone,ceramic,shell,light-reflecting material, transparent material.Specifications:Item Size: 17x20cmPackage Size: 34x20x25cmMaterial:aluminumColor: silverLaser Power: 500mw /1600mwMaximum engraving area: 17*20cm (maximum stroke)Drive control panel: Advanced CNC2 axis control board (this shop sells 3-axis CNC control board)Stepper motor: new high quality stepper motorControl software: benbow software supports power adjustable, low light positioningPower supply: 12V; laser head supply voltage is also 12VBody material: high-grade aluminum profile +8MM thick acrylicPackage included:1 x Engraving Machine Note (Please pay attention):1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!2. The red cord is DC12v(+),black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect to the ManaSE board correctly!3. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser module more than 30 minutes per time and casue the damage ), please feel free to ask our customer service for a help.4. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.5. If you have any quality problem about the machine, please feel free to contact us. Many operative problem can be solved according to your video and problem description. Thank you in advance.FAQ:1. What software can support this machine? And what image format? Engrave Mode? Supported Software: EleksCam,T2-Laser, GrblController, LiteFire, Laser GRBL, etc. Supported Image Format: jpg, bmp, svg, G-code Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving2. What system can the EleksCAM support? PC Windows XP/7/8/10 , Laptop is ok,too.3. My laser doesn't work, what should I do? If the machine does not work, it might because:① The wire connection is wrong.Please check the connection like the picture shown.② Your computer could not support the software.Please use Win XP 7/8/10 to check it.③ Software problem.Please check whether wires are inserted rightly. And then check your data setting.④ The kit misses some accessories.Please compare with the instruction and tell us, we will solve it once you send us the email. ⑤ Laser module/ driver board/power supply is broken.Please check which part is the main problem,and then send us a video to prove it. Or you can send us a video about your software setting,working laser and driver board. We will analyze it and give you a solution.4: My software shows: Not data, what should I do? There might be two reasons. ① You did not open Administrator privileges to run the software. Please try this. ② Your computer architecture is incomplete:check whether VC ++ and. Net and directX are installed, and have to turn off the virus.5. Can I regulate the laser power or the laser power is adjustable? Our new Mana SE controller board can adjust the power. Please download our ElekesCAM software to do it.6. Can I upgrade stronger power laser module by myself? Can I extent rail frame? Yes,you can.DC12V laser module can be installled on this machine. The red is positive.You can also extent the frame by yourself, but we do not provide rails. Please note that. 7. When I click arrows to control the motors, it works. But when I begin to make it work with EleksCAM software, it does not move. What should I do? The EleksCAM could move by hand but could not move when focus.The probelm is the area and language inside the system control panel. Please set the format to English and United States.Then it will be ok. Detail is shown in the wiki link above.8. My laser module is always on and could not turn off.What should I do? Please try to connect the Signal(S) and GND(-). If the laser module turn off, that means the laser module is ok, the problem might be the ManaSE board or software setting. If the laser module is still on, that means the laser module might be damaged.9. If my laser is broken and I might find the reason(Or I could not find) . What should I do? Find the reason: Take a video to prove the part is broken and then send it to us. we will give you a solution according to your video.
Related
Related
Related
Related