Description: Laser Stripper is the ultimate, non-corrosive, no-rinse mop-on stripper. Formulated to immediately rip off multiple layers of finish or sealer using cold or warm water. Laser cuts strip time in half, saving considerable labor costs. Blue Liquid, Lemon Odor. Size: 32 oz bottle / a gallon Directions: FOR BEST RESULTS, USE OF WET-VAC IS RECOMMENDED Dilute concentrate based on the amount of build-up. Light Build-Up: 8 oz. per gallon of cold or warm water Medium Build-Up: 32 oz. per gallon of cold or warm water Heavy Build-Up: 64 oz. per gallon of cold or warm water Apply to a small test area to determine the amount of time needed to adequately strip the floor. Mop diluted solution liberally onto the floor surface working in 5’ x 5’ sections or use auto scrubber for application. Allow to stand 4-5 minutes. Keep the area wet. If the surface is unusually dirty or scuffed, use a mop, brush or floor machine to agitate and loosen dirt and finish; for stubborn marks scrub using a stripping pad. Pick up solution with a mop or wet-vac machine. No rinsing required if a wet-vac is used. Allow the floor to dry. Apply first coat of finish or floor sealer in full Specifications: Color: Blue Odor: Lemon pH: 12 Viscosity: Water Thin Solubility in Water: Complete Flash Point: None Safety: Never allow solutions to dry on the floor. Always test solutions on an inconspicuous area of the floor to be stripped to check compatibility. Emulsified floor finish and wax are very slippery; keep the area clear until the surface is completely dry. It is recommended that protective gloves and safety glasses be worn when using this and all cleaning products.
