Motsenbocker's Lift Off Latex Paint Remover Breaks the Molecular Bond™ between stain and surface! Product Description: The patented formula of Mötsenböcker’s Lift Off® Breaks the Molecular Bond™ for fast, easy removal of latex paint and latex enamel from walls, trim, molding, floors, wood, vinyl, tile, laminate, metal, brick, concrete, and vehicles. Lift Off® will not melt or dissolve paint, leaving paint solid and intact for safe and easy clean-up and disposal. Environmental Facts: Water-based, biodegradable formula with low VOC content. Contains less than half the regulated VOC limit. Tips and Tricks: Use caution on painted, colored, or treated concrete and other surfaces. Lift Off® may remove these. For Hard Surfaces: Test in an inconspicuous area to ensure surface integrity and compatibility. Spray area and wait at least 60 seconds. Agitate with a soft brush if necessary. Wipe with a clean white cloth or rinse clean if possible. Repeat if necessary. For Porous Surfaces: Test in an inconspicuous area to ensure surface integrity and compatibility. Spray area and wait at least 3 minutes. Agitate with a soft brush if necessary. For best results remove paint with a high pressure water system set at 1200 psi or greater working from bottom to top. Repeat if necessary. For Vehicles: Test on an inconspicuous area. Spray directly onto area with graffiti or paint transfer. Wipe immediately with clean, white cloth. Do not allow Lift Off® to remain on vehicle for more than 5-10 seconds at a time. Completely wash Lift Off® from vehicle after treatment. Repeat if necessary. Avoid applying Lift Off® to vehicles in direct sunlight. SDS
