Skeletal design remote antenna with onboard amplifier ideal for long cable runs, phantom powered from Venue, UMC16 or Bias T. The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth. Onboard amplifier ideal for long cable runs, phantom powered from Venue, UMC16 or Bias T Specifications Models ALP500, ALP620 Pattern Gain +7 dBi (isotropic), +4 dBd (over dipole) Range 450-862 MHz Weight ALP500: 14.2 oz. ALP620: 9.4 oz. ALP650/E Series: 12 oz. Connector 50 Ohm BNC Dimensions 12” high x 10.5” deep x 1.5” wide (ALP650 without mounting hardware) ALP650 Series with RF Amplifier Pattern Gain +7 dBi (isotropic), +4 dBd (over dipole) Passband ALP650L/E (RoHS compliant): 470.000 - 700.000 MHz ALP650M/E (RoHS compliant): 537.000 - 770.000 MHz ALP650H/E (RoHS compliant): 640.000 - 870.000 MHz RF Gain +12 dB with 0 dB attenuator +8 dB with 4 dB attenuator +5 dB with 7 dB attenuator Third Order Intercept +27 dBm @ input (+41 dBm output) Weight 12 oz. (all versions) Power Requirements 8V to 16V DC at the input jack Auto reset poly fuse protection circuit Constant power switching supply 8V DC: 125 to 145 mA 12V DC: 83 to 106 mA 14.4V DC: 69 to 89 mA 16V DC: 60 to 80 mA Phantom Powering DC voltage supplied via coaxial cable by UMC16B, VRM input jack, or BIAS-T power inserter (70 to 80 mA) Power Consumption 1.2 Watt nominal (switching regulator)
Related
Related
Related
Related