The Lectrosonics DSQD Half Rack Receiver with analog and digital audio outputs utilizes the Lectrosonics signature digital architecture with remarkable audio quality and ultra-low latency. The receiver includes an extended operating range rivaling the best analog and Digital Hybrid Wireless® systems with continuously tunable tracking filters covering 470.100 – 614.375 MHz. Antenna ports on the rear panel accept input from remote antennas, with a “loop-thru” output to another mainframe using the internal multicoupler. A kit is also available to mount antenna inputs (BNC connectors) on the front panel. Features External DC Power: Mains or 7 - 18 DC Latency as low as 1.4ms Continuously tunable tracking input filters covering 470.100 – 614.375 MHz Compatible with mono and stereo digital transmitters, and Digital Hybrid Wireless® transmitters. Powering for active antennas, protected, switchable in the menue Analog and Digital audio outputs with TalkBack (in applicable RX modes) Ethernet and USB interface for remote operation Included Accessories 1-USB cable 1-Bracket, rear tie 1-Bracket, front tie 1-Rack flange bracket 1-Rack “D” handle 1-SCR10 cap screw 1-Spacer 1-Rubber feet, large, stick on 1-Hex key 1-Hole plug 2 – right angle BNC antennas, block 19 2 – right angle BNC antennas, block 22 1-power supply Specifications Operating Spectrum 470.100 - 614.375 MHz Frequency Adjustment Range 25 kHz steps Sampling Size and Rate 24-bit, 48 kHz Digital Modulation 8PSK with Forward Error Correction Data Encoding Proprietary ADPCM Encryption AES 256-CTR (per FIPS 197 and FIPS 140-2) System Latency Digital Output D2 mode: 1.4 ms plus Dante Duet mode: 1.4 ms plus Dante Hybrid modes: 2.0 ms plus Dante Digital Output D2 mode: 1.9 ms Duet mode: 1.9 ms Hybrid modes: 2.5 ms Audio Performance Frequency Response 20 Hz - 20 KHz, ±1 dB THD+N 0.05% (1 KHz @ -10 dBFS) Dynamic Range 108 dB A-wtd, NR=NORMAL Adjacent Channel Isolation >85 dB Diversity Technique Noiseless antenna switching Sensitivity -98 dBm for 10⁻⁵ BER Antenna Inputs/Outputs Dual BNC female, 50 ohm impedance Audio Outputs XLR: Balanced, -35 to +8 dBu Headphone: 1/8 inch phone jack Dante model only: RJ45 Gigabit Ethernet AES3 model only: TA3M External DC Power 7 to 18 VDC; 2.5A (max) Weight 1.95 lbs.; 880 grams Dimensions 8.375 x 1.75 x 7.375 in. (213 x 44.5 x 187 mm) Origin Designed and manufactured in the USA
Related
Related
Related
Related