The LED Lenser remote pressure switch type E is designed for use with the LED Lenser MT14. Once the pressure switch is plugged in the torch can then be operated using the pad that has two buttons; one for momentary illumination and one to turn the torch on constantly. The LED Lenser remote pressure switch type E is designed for use with the LED Lenser MT14. To connect the pressure switch firstly make sure you have removed the pocket clip from the torch. Plug the circular end of the switch into the micro USB port of the torch and once in position the rubber holder can then be slid over the torch into place and it will hold the switch in place and prevent it accidentally being pulled out. Once the pressure switch is plugged in the torch can then be operated using the pad that has two buttons; one for momentary illumination and one to turn the torch on constantly. An adhesive strip is included so that you can securely attached the pressure pad to a surface if desired. The spiral cord provides flexibility and the length of the cable is from 30 - 50 cm depending on how far you stretch the cord. Product Features Momentary or constant activation via the padWeight: 21 gramsCable length: 30-50 cm
