This is a custom LED signage built with Aluminum Composite Panels and Acrylics. Even without turning on the LEDs, this is an amazing standalone display due to its natural sheen from the acrylic. You can also opt-in to go with Full-lit or Push-through face depending on your specific design. Full-lit will lit up the entire acrylic with UV prints on top. Push-through will only lit-up where the acrylics are pushing out of the surface. We fabricate and ship from our California workshop so rest assured we can deliver your signage on time.Application: Indoor Wall Mount This Product Includes: LED Sign AC/DC Power Plug (45-Inch cable length) Mounting Template Mounting Studs Depth/ Return: 2" thick *Complicated cuts with a lot of small details would either need to be removed or edited for best results. (This is for push through letter options) *To proceed with your order, we need a ready-to-cut vector file. If you only have a raster image (e.g., PNG or JPG), we can convert it to a vector format for an additional fee of approximately $88. (Only application for push-through style) Installation Instruction:1. Tape Mounting Template to the desire sign location. 2. Trace mounting holes hard enough so you can see them on the wall after removing the Mounting Template. 3. Remove Mounting Template and drill into your wall. 4. Lightly fill your drilled holes with silicone for extra security. 5. Insert Stainless Steel Studs into the back of your LED Sign. 6. Insert LED Sign flush against the wall. 7. Plug in your AC/DC Adaptor and you are ready to go! (Please consult with an electrician if you want to hide wiring behind the wall.)
