Motion Sensor LED Tube 150cm 22W with Integrated Photocell The 150cm 22W motion sensor LED tube combines efficient commercial lighting with an integrated microwave motion sensor and photocell. The tube automatically increases to full brightness when movement is detected and reduces its light output when the area is no longer occupied. This intelligent lighting solution helps reduce unnecessary electricity consumption without requiring users to operate a wall switch. It is particularly suitable for locations where lights would otherwise remain switched on continuously. The motion sensor LED tube produces a natural white light and is suitable for car parks, warehouses, offices, corridors, factories, workshops, stairwells and other commercial or industrial environments. Adjustable Motion Sensor LED Tube Unlike conventional sensor tubes with fixed settings, this adjustable motion sensor LED tube allows the standby brightness and operating time to be configured according to the requirements of the installation. The adjustable settings make it easier to achieve the right balance between visibility, safety and energy efficiency. Key Features 150cm T8 LED tube 22W power consumption Natural white light output Integrated microwave motion sensor Integrated photocell for daylight detection 2-step dimming operation Five adjustable standby brightness levels Nine adjustable time intervals from 5 seconds to 60 minutes 180-degree rotating end caps Maximum sensing height of up to 10 metres Maximum detection radius of up to 25 metres TÜV certified 2-Step Dimming Operation When movement is detected within the sensing area, the motion sensor LED tube automatically increases to full brightness. After the selected hold time has passed without further movement, the tube reduces its light output to the selected standby brightness level. It remains at the reduced level until movement is detected again. When a person, vehicle or other moving object enters the detection area, the tube immediately returns to full brightness. This 2-step dimming operation provides continuous background illumination while reducing the amount of electricity used when the area is unoccupied. Five Adjustable Brightness Levels The standby brightness can be configured using five available output levels. This allows the motion sensor LED tube to provide an appropriate amount of background lighting for each application. A lower standby level can be used to maximise energy savings, while a higher level can provide greater visibility in areas where continuous background lighting is required. Nine Adjustable Time Settings The hold time can be configured using nine adjustable intervals ranging from 5 seconds to 60 minutes. This setting determines how long the motion sensor LED tube remains at full brightness after movement has been detected. If further movement is detected during this period, the timer restarts. Shorter settings may be suitable for corridors, stairwells and access routes. Longer settings may be more appropriate for warehouses, workshops, factories and working areas where people remain present for extended periods. Microwave Motion Detection The integrated microwave sensor uses the Doppler principle to detect movement within the surrounding area. A microwave signal is transmitted and reflected back to the sensor, allowing it to identify movement from people, vehicles and other objects. When movement is detected, the tube increases to full brightness. When the detection area is no longer occupied, the light returns to the selected standby level after the configured hold time. Microwave sensing can provide a wider and more responsive detection area than many conventional passive infrared sensors, making it suitable for large commercial and industrial spaces. Integrated Photocell The built-in photocell allows the motion sensor LED tube to respond to the surrounding daylight level. This can help prevent unnecessary operation when sufficient natural or ambient light is already available. By combining motion detection, daylight monitoring and adjustable standby brightness, the tube provides an effective lighting solution for reducing operating costs and improving energy efficiency. 180-Degree Rotating End Caps The rotating end caps can be adjusted through 180 degrees, allowing the tube and sensor position to be correctly aligned after installation. This is particularly useful where the lamp holders are positioned at different angles or where the direction of the light output and sensor coverage needs to be adjusted. Suitable Applications Underground and multi-storey car parks Warehouses and distribution centres Factories and production areas Workshops and maintenance areas Office corridors Stairwells and communal areas Storage rooms Loading bays Service corridors Commercial buildings Industrial facilities Technical Specifications Product type Motion sensor LED tube Tube format T8 Length 150cm Power consumption 22W Light colour Natural white Sensor type Microwave motion sensor Daylight control Integrated photocell Operating mode 2-step dimming Brightness settings Five adjustable standby levels Time settings Nine intervals from 5 seconds to 60 minutes Maximum sensing height Up to 10 metres Maximum detection radius Up to 25 metres End caps 180-degree rotating end caps Certification TÜV certified Energy-Efficient Commercial Lighting A motion sensor LED tube can reduce unnecessary lighting operation in areas that are not occupied continuously. Instead of remaining at full brightness throughout the day or night, the tube automatically adjusts its output according to movement, the selected hold time and the surrounding daylight level. The 150cm motion sensor LED tube is an effective replacement for conventional fluorescent tubes and standard LED tubes in commercial and industrial installations where improved lighting control is required. Please refer to the product PDF for complete installation instructions, sensor configuration settings and technical information.
![Lulant-T8 LED Motion Sensor [White]](https://cdn.shopify.com/s/files/1/0087/1838/5216/products/T8.jpg?v=1605156600&width=480)
