Build a custom electric guitar from the ground up with this left handed blank TE-style guitar kit, designed specifically for left handed players and builders. This unfinished slab body guitar kit is ideal for those who want full control over shaping, finishing, electronics, and final setup. The kit arrives ready for sanding, routing, carving, and customization, making it suitable for experienced builders and advanced DIY projects. Full Specifications General Dexterity: Left-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Advanced (8/10) Blank headstock ships undrilled and unshaped, so you cut the outline and drill the tuner holes yourself Flat body is straightforward to sand and finish evenly Mahogany has open grain that needs filling before finishing for a smooth result Body Material: Mahogany Type: Solid Cutaway: Single Binding: None Top Veneer: None Neck Material: Maple Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 25.5″ Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: Pearl White Headstock Shape: Standard (as in product images) Binding: None Nut: White Plastic Electronics Neck Pickup: Single Coil Bridge Pickup: TE-Style Controls: 1 Volume, 1 Tone, 3-Way Selector Wiring: DIY (soldering required) Output Jack: Not pre-drilled (builder drills to suit the body shape) Hardware Bridge: T-style Tuners: Closed Pickguard: Black Knobs: Chrome Cavity Covers: None Strings: Steel Finish: Chrome What's in the Box Unfinished body blank, squared off and routed on the front for the neck, both pickups and the controls Maple neck with dark fretboard, pearl dot position markers and a drilled headstock 1x black pickguard with the neck pickup already fitted under a chrome cover 6x chrome sealed tuners with bushings and washers 1x string retainer with mounting screw 1x black bridge plate with six chrome saddles and the bridge pickup fitted 1x chrome neck plate with gasket 4x long neck mounting screws 1x chrome jack plate with output jack and two mounting screws 1x pre-wired chrome control plate with two knurled chrome knobs, a three-way switch with black tip and wiring leads 2x strap buttons with screws 1x bag of assorted screws 1x Allen wrench 1x set of strings 1x guitar cable with one angled plug What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related