Leitner Designs NEOS Grenadier Universal Side Kick Accessory Panel Interior Cage Mounted. 200lb Off-Road Capacity. No Rain Gutter Stress. The Ultimate Exterior Storage Solution for your INEOS The Leitner Designs Universal Side Kick Accessory Panel for the INEOS Grenadier is the rugged, high-capacity mounting solution you’ve been waiting for. Specifically designed for owners without a Leitner 3/4 Platform, Full-Length, or Load Bar Kit, this "Universal" version brings legendary Leitner strength to your stock setup. Unlike inferior designs that clamp onto the thin exterior rain gutters, the Side Kick utilizes heavy-duty billet aluminum brackets that mount directly into the interior roll cage. This creates an incredibly rigid foundation capable of carrying up to 200 pounds of gear in the harshest off-road environments. The Problem & The Solution: The Pain: Most Grenadier accessory mounts attach to the flimsy rain gutter, risking body damage. Plus, interior gear takes up valuable passenger space. The Solution: The Side Kick bypasses the gutter entirely by mounting to the roll cage, moving heavy recovery gear and fuel outside for easy access while protecting your vehicle's structural integrity. Why the Side Kick is a Must-Have 200lb Load Rating Engineered for extreme use, this panel is rated to hold 200 lbs off-road. Perfect for heavy Jerry cans and recovery boards. Interior Cage Mounting Uses billet aluminum brackets that anchor to the vehicle's roll cage, providing a rock-solid mount without touching the rain gutter. Pre-Drilled Compatibility Comes ready for MaxTrax, RotopaX (LOX/DLX), and Leitner Jerry Can holders right out of the box. Universal Molle Grid The laser-cut Molle pattern allows you to attach almost any accessory on the market today with ease. Premium Materials 1/8" zinc-plated, powder-coated steel brackets paired with a 3/16" aluminum panel for maximum corrosion resistance. Fast Installation Installation takes only minutes and includes all necessary mounting hardware for a hassle-free setup. Built for the Long Haul Whether you're carrying 20L Wavian fuel canisters or emergency traction boards, the Side Kick puts your gear exactly where you need it: within reach on the side of your vehicle. The 3/16" aluminum panel is laser-cut for precision and finished to withstand the elements. 200 lbs Off-Road Capacity 3/16" Aluminum Panel 1/8" Steel Brackets Universal Molle Grid Real Owner Feedback ★★★★★ "I was worried about mounting heavy RotopaX to the rain gutters because I've seen them bend on other rigs. The Leitner Side Kick mounting to the interior cage is a game changer. It's rock solid even on corrugated washboard roads, and having my fuel outside the truck is much safer." - Mark S., Grenadier Owner & Explorer Compatibility & Configuration Note Configuration: This kit includes hardware for ONE side of your Grenadier. To equip both sides, please order two units. Standard vs. Universal: If you ALREADY have the Leitner 3/4, Full-Length, or Load Bar Kit, you need the Standard Side Kick. This Universal version is strictly for vehicles without those Leitner rack systems. Why Choose the Leitner Side Kick? Feature Leitner Universal Side Kick Gutter-Mount Panels Mounting Point ✓ Interior Roll Cage (Strength) ✗ Rain Gutter (Flimsy) Off-Road Rating ✓ 200 lbs Capacity ✗ Usually 30-50 lbs Material ✓ 3/16" Heavy Duty Aluminum Thin Steel or Plastic Predrilled Fits ✓ RotopaX, MaxTrax, Wavian Generic Only Protection ✓ Zinc-Plated & Powder-Coated Standard Paint Fitment Requirements To install this product, your INEOS Grenadier MUST be equipped with the following: Factory-installed “TOOL BELT” L-Track (located below the rear window). This system is fully compatible with the original L-Track Fasteners that come with your Ineos Grenadier. It is designed to work seamlessly with RotopaX LOX or DLX mounts and Leitner’s custom Jerry Can holders for 20L Wavian fuel canisters. Installation Instructions Universal Side Kick Installation Guide (PDF) CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Frequently Asked Questions + Does this work with my factory roof rack? Yes! This "Universal" model is specifically designed for Grenadiers that do not have the Leitner ACS system installed. It is compatible with factory roof racks or no roof rack at all, provided you have the side L-Track. + Will mounting to the roll cage damage my interior? No. The billet aluminum brackets are engineered to mount securely to the internal structure of the vehicle. This is actually much safer for your vehicle’s bodywork than external gutter mounts, which can cause cracking and denting under heavy loads. + Can I mount a full-size spare tire to this panel? While the panel is rated for 200 lbs, it is designed for Molle accessories, RotopaX, and recovery boards. We do not recommend mounting a spare tire to this specific panel as the geometry and mounting depth are not optimized for wheel mounting. + Is the hardware rust-resistant? Absolutely. The main panel is 3/16" aluminum (naturally rust-proof), and all steel mounting brackets are zinc-plated and powder-coated for ultimate protection against the elements.
Related
Related
Related
Related