☀️Summer Mega Sale 2026☀️ 🌴Extra 15% OFF Everything*🌴 Leten AV Vibrator / 2nd Generation Heated Product Specifications Color: GrayAccessories: Color box, blister pack, instruction manual, warranty card, charging cable, anti-counterfeiting labelMaterial: Silicone, ABSProduct Dimensions: 271.5*54.5*54.5mmPackaging Dimensions: 290*58*110mmNet Weight: 0.177kgModes: 7 intensity levels + 10 frequency levelsPower Supply: USBMaximum Noise: ≤65db (variable speed) Features and Selling Points 1.Multiple levels of powerful vibration, stimulating new textures, one-button heating, larger size, 360° swing, LED indicator;2. Full and large 55mm vibrating head, thick and robust handle like holding a large penis, stronger contact and intense vibration from the large head;3. More powerful vibration, vibration speed increased by one level to seven levels, significantly increasing the intensity of the vibration by 30%;4. Hundreds of raised bumps in 6 rings, continuous heating at 39°, multi-purpose;5. 360° head swing, 10 frequencies and 7 intensities, matte silicone textured material;6. LED indicator, large capacity battery, low-decibel vibration, waterproof head. Button Instructions and Usage Power Button1. Press and hold for 2 seconds to turn on/off. A single press will illuminate the indicator light for 2 seconds and then turn it off.2. With the power on, a single press cycles through 7 vibration intensities.Preheating Button1. With the power off, press and hold for 2 seconds to turn the preheating function on/off.2. If the power is not turned on within half an hour after preheating is activated, the preheating function will automatically turn off.3. With the power on, a single press turns the preheating function on/off.Vibration Frequency Switching ButtonWith the power on, a single press cycles through 10 vibration modes. Charging and Usage Instructions: Connect the included magnetic cable to the charging port on the bottom of the product to charge. 1.Charge using a USB cable connected to a computer or power bank, or use a mobile phone USB charger in a wall socket.2. The indicator light will flash red in a loop while charging; do not turn on the device.3. Once fully charged, the indicator light will remain red for 5 minutes and then turn off. A full charge takes approximately 2 hours. Do not overcharge for extended periods.4. The device cannot be turned on while charging. Please unplug the power cord after charging is complete before use.
