Create flatter, evenly spaced tiled surfaces with the Acorn Tiles tile levelling kit. This complete bundle contains 1,000 single-use levelling clips and 100 reusable wedges, giving you everything needed to begin levelling suitable wall or floor tiles. Choose 1.5mm or 2mm clips to create your required grout-joint width. The clips are suitable for tiles between 3mm and 15mm thick and work with the included wedges to reduce lippage between adjoining tiles. Bundle contents • 1,000 tile levelling clips• 100 reusable levelling wedges• Choice of 1.5mm or 2mm clips Key features • Complete clip and wedge starter bundle• Helps reduce lippage between adjoining tiles• Creates consistent 1.5mm or 2mm grout joints• Suitable for tiles between 3mm and 15mm thick• Suitable for compatible wall and floor installations• Wedges can normally be reused• Suitable for professional tilers and DIY projects How to use the tile levelling kit Apply the tile adhesive and position the first tile. Insert the levelling clips beneath the exposed tile edges. Position the adjoining tile against the clips. Push a wedge through each clip until the tile surfaces are held level. Allow the adhesive to cure fully. Remove the clips by striking them along the direction of the grout joint. Collect the wedges for your next installation. Do not overtighten the wedges, as excessive pressure could damage the clips or move the tiles. Always allow the adhesive to cure according to its manufacturer’s instructions before removing the clips.
