LevTec Tile Leveling System Clips 1/16" 2000 Piece Box LevTec Tile Leveling Systems are designed to create flawless, lippage-free tiling projects efficiently every time. The new and improved interlocking design levels the tiles while setting, and unlike other wedge-based systems, the LevTec breakpoint is below the tile, leaving no spacing material behind and allowing total expansion after removal. Features LevTec 1/16" Clips are available in a 2000 Piece Bulk Box For use on tiles up to 12mm thickness Easily create a flawless finish Locks in tiles preventing slump while drying Eliminates lippage Easy to remove Speeds up the installation process To be used with LevTec Wedge How to Install Tile with the LevTec Leveling System Step 1: Spread your tile adhesive and lay the tile. Place LevTec clips underneath the tile slightly back from the edge. Keep the LevTec clip firm against the tile, as the clip acts as a 1/16th spacer Step 2: Set the adjacent tile firmly into the adhesive. Butt the tile against the LevTec clip giving the 1/16th joint (if a more giant joint is required, spacers can be used, or set the required joint size). Slide the LevTec wedges through the LevTec clips until they are firmly leveling both tiles Step 3: Using your thumb, push the LevTec wedge with the right amount of pressure required to create the perfect finish. Once the tiles are locked in position, they will stay until the adhesive sets. You can still slightly adjust the joint width while the adhesive is setting if needed without disrupting the height of the tiles Step 4: After the adhesive has been set, you can easily remove the LevTec wedges and clips with a rubber mallet on the walls and by mallet or your foot on the floor. Hit the LevTec clip on its side lug in the direction of the tile joint, and the wedge and clip will dislodge from the tile at the breakpoint below the tile, leaving the joint free for grouting or silicone expansion
