LevTec Tile Leveling System Wedges 250 Piece Bag The LevTec Tile leveling system features a patented easy-break system that breaks the clip off at the base, eliminating time spent removing material from clips that break off flush with the tile surface. Unlike other wedge-based systems, the LevTec breakpoint is below the tile, leaving no spacing material behind and allowing total expansion after removal. Features LevTec Wedges are available in a 250 Piece Bag Easily create a flawless finish Locks in tiles preventing slump while drying Eliminates lippage Easy to remove Speeds up the installation process To be used with LevTec Clips How to Install Tile with the LevTec Leveling System Step 1: Spread your tile adhesive and lay the tile. Place LevTec clips underneath the tile slightly back from the edge. Keep the LevTec clip firm against the tile, as the clip acts as a spacer Step 2: Set the adjacent tile firmly into the adhesive. Butt the tile against the LevTec clip giving the space desired (if a larger joint is required, spacers can be used, or set the required joint size). Slide the LevTec wedges through the LevTec clips until they are firmly leveling both tiles Step 3: Using your thumb, push the LevTec wedge with the right amount of pressure required to create the perfect finish. Once the tiles are locked in position, they will stay until the adhesive sets. You can still slightly adjust the joint width while the adhesive is setting if needed without disrupting the height of the tiles Step 4: After the adhesive has been set, you can easily remove the LevTec wedges and clips with a rubber mallet on the walls and by mallet or your foot on the floor. Hit the LevTec clip on its side lug in the direction of the tile joint, and the wedge and clip will dislodge from the tile at the breakpoint below the tile, leaving the joint free for grouting or silicone expansion
