If internal or external masonry walls are very smooth or highly porous, then a standard lime base coat may have difficulty sticking to the surface. Lime green Stipple coat will prepare them ready for the next coat of lime plaster or lime render. Walls and ceilings can then be completed using our finish lime plasters for a high-quality surface prior to painting. Like Ultra and Duro, Stipple Coat lime preparation is a lime-based product so it allows the walls to breathe and expel any trapped moisture. For non-porous sealed surfaces, such as tanking slurries, use Lime Green Grippa. Stipple Coat can be hand-applied or machine sprayed for faster coverage. Surface Preparation: Remove dust, surface contaminants and loose or friable material. Ensure Masonry is not waterproofed or painted. Stipple Coat Application Guidelines: Lime green Stipple is best thrown on or sprayed on, it can also be toweled on and then stippled with a stiff bristle brush. Apply approx. 3 to 5mm thick. Leave the surface rough and heavily textured Further Coats: Lime green Ultra or Duro¸ as undercoats followed by a topcoat of Lime Green Natural Finish Prevent all coats from drying out too rapidly. Lightly spray each coat with water if it is hot or the product is drying too quickly. Protect from adverse conditions such as frost, rain etc. If you require further information regarding Lime Green Stipple Coat Lime Preparation, get in touch with a member of our team today. PLEASE NOTE: Stipple coat is available for delivery only. Please contact us for pallet delivery rates. Data Sheet
