Linear MTR-3 Visor Transmitter Megacode 3-Button Note: This remote has been replaced by the MTS3 model which is what will ship out. Stylish small-form-factor, low-profile Remote controls up to three MegaCode receiver and can be attached to your car’s visor. The Linear PRO Access digital transmitter is a radio control device designed for wireless operation of automatic garage doors and gates. Each button on the transmitter emits a distinct code upon pressing. You can use one button to control a garage door, another to operate an access gate, and a third for an additional garage door opener. Unlike typical systems with a coding switch, Linear PRO Access devices are pre-coded at the manufacturer. Receivers are set up to recognize a transmitter's unique digital code through a "learning" process, responding only to transmitters that have been programmed into its memory. The transmitter runs on a Type CR2032 coin-cell battery, expected to last at least one year under normal conditions. When activated, an indicator light on the transmitter illuminates. A dim or non-lighting indicator signals the need for a battery replacement. To extend battery life, an internal timer curtails the transmission to 20 seconds should a button remain pressed. Key Features Activates three MegaCode receivers Test/operate LED Visor mounting clip supplied Visor clip mounts vertical or horizontal 1,000,000+ Codes Technical Specifications RF Frequency: 318 MHz Power: 1x CR2032 battery Dimensions (W x H x D): 3″ x 1.7″ x 0.6″ Installation / User Manual
