Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertable CAN plug. Please note proper CAN protocol must be followed. See Link manual for guidance. The CAN-Lambda’s ability to measure the proportion of oxygen in exhaust gases makes it an essential tool for accurately tuning fuel mixtures as well allowing your ECU to make tuning adjustments on the fly. Being fully digital the CAN Lambda’s powerful LSU 4.9 sensor will eliminate any loss of signal, risk, delays and errors that analogue alternatives cause. The CAN-Lambda never requires free air calibration. Box Contents CAN-Lambda device Bosch LSU4.9 Sensor Deutsch 4-Way Connector Kit O2 Bung and Plug 2 Large Stickers 2 Small Stickers Quick Start Quide Specifications 1 x 4 pin male DTM connector (power/CAN) 1 x 6 pin mating connector for LSU 4.9 Lambda sensor DimensionsEnclosure 60 x 26 x 15mmLead length 170mmWeight 70g Input VoltageController 7.5 - 20 VSensor 10.8 - 16.5 V Input CurrentController 100 mASensor Heater 8 A Operating Temp -20 - 100 deg.CSensor Bosch LSU4.9Sensing Range 0.67 - 10 lambda CAN Frequency 1Mb/s,500kb/s,250kb/s,125kb/s
