Lippert Quick Level Touch Panel | 425306 | Cross-Platform | OEM

The RV Surplus Verified independent store

→

Restore full leveling control with the Lippert Quick Level Touch Panel Assembly (SKU 425306 / MPN 18-2918). Genuine Lippert OEM plug-and-play replacement touch panel that spans thr ee of Lippert's most common leveling platforms — Ground Control TT, Ground Control 3.0, and Level-Up Hydraulic. Comes with cord/harness attached. One-touch auto-level, full retract, individual jack control, and real-time LED status indicators. ⭐ Cross-Platform Compatibility Rare feature in the Lippert leveling ecosystem: this touch panel is engineered to work across three distinct leveling platforms: Ground Control TT — automatic leveling for travel trailers (electric or hydraulic jacks) Ground Control 3.0 — updated Ground Control platform on many late-model fifth-wheels and travel trailers Level-Up Hydraulic — hydraulic automatic leveling for fifth-wheels and motorhomes If your existing panel fits any of these three systems, the 425306 is the correct replacement. ⚠️ NOT Compatible with These Systems Verify your leveling system before ordering — this panel will NOT work with: Ground Control 2.0 (different controller platform) Leveleeze PowerGear-based systems HWH-based systems Check the label on your existing control module or the original build sheet for your system name before ordering. What This Panel Does One-touch auto-level — initiates the full automatic leveling sequence with a single button press Individual jack control — manual extend and retract per corner Full retract — single-button all-jacks retraction before travel LED status indicators — real-time display of system status and individual jack position, meaningful when maneuvering at tight campsites or verifying all jacks are up before hitching Companion Ground Control TT Controller If the controller (not the touch panel) is the failure on a Ground Control TT system, see the Lippert Ground Control TT Leveling Controller (421483). Panel failures typically show as unresponsive touch surface, cracked faceplate, or dead LEDs; controller failures typically affect leveling function itself. Brain Box Failure Instead? If the leveling brain box controller (not the touch panel) is the failure on a Level Up system, see the Lippert Level Up Brain Box Controller (807615). Panel failures show as cracked faceplate, unresponsive touch surface, or dead LEDs; brain box failures show as error codes, jacks running continuously, or auto-level cycle failing. ⭐ Plug-and-Play Installation The touch panel comes with the wiring harness/cord attached. Uses the same connector as the original panel — no splicing, no new wiring runs needed for a standard swap: Disconnect shore power and verify all jacks are fully retracted Remove original panel fasteners and gently pull the panel from the mounting surface Disconnect the wiring harness connector from the back of the old panel Connect the harness to the new 425306 panel (keyed connector prevents incorrect installation) Seat the new panel and reinstall original fasteners Restore power and test auto-level, individual jack, and full retract functions Save vs Full System Replacement Lippert leveling control modules are designed to last the life of the RV. Panel failures are usually caused by UV degradation, moisture intrusion, or physical damage — not module failure. Replacing only the touch panel avoids pulling the entire control box and is meaningfully more cost-effective than a full system swap. ⭐ Maintenance Tip — Extend Panel Life After installation, apply a thin bead of self-leveling lap sealant around the panel perimeter if it mounts to an exterior wall. UV exposure and water intrusion at the panel edge are the most common causes of premature touch panel failure — a simple seal significantly extends panel life. Mounting Hardware Reuse the original mounting hardware (screws, brackets). Replacement hardware is not included. Cross-Reference Part Numbers Part Number: 425306 MPN / Vendor Part: 18-2918 Electrical System Voltage: 12V DC (standard RV house battery) Wiring Interface: Keyed plug-and-play harness connector — matches original Lippert harness What's Included Touch panel assembly (425306) Integrated wiring connector / cord What's NOT Included Control module (reuse existing) Hydraulic pump (reuse existing) Jacks (reuse existing) Mounting hardware (reuse original screws/brackets) Wiring harness extensions ⚠️ Post-Install Note If status indicator lights flash error codes after installation, the issue is likely in the control module or sensors — not the replacement panel. Consult Lippert's system troubleshooting guide or contact Lippert technical support. Genuine Lippert OEM Key Features Genuine Lippert (LCI) OEM Quick Level touch panel assembly Part number: 425306 (MPN 18-2918) Cross-platform compatibility across Ground Control TT, Ground Control 3.0, and Level-Up Hydraulic NOT compatible with Ground Control 2.0, Leveleeze, PowerGear, or HWH systems One-touch auto-level Full retract single-button function Individual jack extend/retract LED status indicators for system and jack position Plug-and-play keyed connector — cord/harness attached 12V DC New unit Specifications Brand: Lippert (LCI) Part Number: 425306 MPN / Vendor Part: 18-2918 Type: Quick Level Touch Panel Assembly Compatible Leveling Systems: Ground Control TT, Ground Control 3.0, Level-Up Hydraulic NOT Compatible With: Ground Control 2.0, Leveleeze, PowerGear, HWH-based systems Functions: Auto-Level, Individual Jack Control, Full Retract, LED Status Indicators Voltage: 12V DC Connector: Keyed plug-and-play (matches original Lippert harness) Cord/Harness: Attached to panel Included: Touch panel assembly with integrated wiring connector/cord NOT Included: Control module, hydraulic pump, jacks, mounting hardware, harness extensions Condition: New Show more