Lithofin MN Builders-Clean | Granite & Sawn Finish Bluestone Acidic Cleaner Lithofin MN Builders-Clean is a special acidic cleaner that contains a blend of surfactants, inorganic acids, water conditioning agents, and corrosion inhibitors that clean granite, gneiss, sawn bluestone, basalt, and other natural and artificial non-calcium-containing substrates. Lithofin MN Builders-Clean contains the optimal combination of different acids, rust preventers, and cleaning agents. Lithofin MN Builders-Clean dissolves and removes cement and mortar residue, efflorescence, limescale, stubborn encrusted dirt, rust, and rust discoloration. Lithofin MN Builders-Clean also acts to prevent rust in hard stone types that contain natural iron minerals. Dimensional stone brings natural beauty to your spaces. It dazzles your eyes with a lustrous appearance unless time-worn effects are diminishing all of this. Some areas are affected more rapidly due to heavier ongoing wear and tear or weathering while some are less, thanks to Stone Doctor Australia for paving the way in aiding the maintenance of these internal and external stone surfaces. Proper cleaning and maintenance practices are a must as we recommend products from the Lithofin Brand. In this instance, we would like to introduce Lithofin MN Builders-Clean. All-natural stones are not the same in their intrinsic properties. Applying the same cleaning and maintenance treatments can result in more harm than good. There are so many products available to choose from but one thing is for sure; it is the great quality and high-efficiency products that our company offers which make the difference. Here is Lithofin MN Builders-Clean for your kind attention. Features of Lithofin MN Builders-Clean: Concentrated Very strong Acid based Prevents rust Highly effective For indoor & outdoor use * Not to be used on calcium-based materials i.e. marble, limestone, travertine, polished concrete, etc. Lithofin MN Builders-Clean is an acid-based product that will damage acid-sensitive stone types on contact. HOW TO USE How to Use Lithofin MN Builders-Clean: First, wet the surface, then apply Lithofin MN Builders Clean diluted with water up to 1:10, depending on the type of dirt, and immediately spread the product evenly on the surface with a scrubbing brush. After a few minutes, scrub the surface then wash away with clean water. Do not allow the product to dry on the surface. In stubborn cases, this procedure may have to be repeated. Advice: in case of extremely stubborn, repeated rust discolouration we recommend Lithofin BERO. Please Note: Lithofin MN Builder’s Clean is not suitable for polished or finely-honed surfaces which are sensitive to acid such as limestone, marble, manufactured stone, etc. In cases of doubt, try the product in an inconspicuous area. Surfaces such as chrome, enamel, wood, and similar acid sensitive surface must be protected against splashes and vapours. Acid containing cleaners can develop vapours which may damage sensitive surfaces. We highly recommend carefully washing the product off the surface and ensuring good ventilation during and after use. Safety Refer to the Safety Data sheet (SDS) before use Test in a small, hidden, area before the main application Keep away from heat and humidity Keep away from direct sunlight Field of use For removing cement residues from newly installed surfaces, for thoroughly cleaning used surfaces and for removing rust and rust discolouration. Lithofin MN Builders-Clean prevents rust discolouration, which occasionally appear when cleaning iron containing stones such asserrizzo, cresciano, calanca, sardo white, etc. The product is therefore particularly suitable for those stones. Surfaces: suitable for all acid resistant natural stones such as granite, gneiss and quartzite. Not suitable for acidic sensitive surface like marble, limestone and other natural stone surfaces. ADDITIONAL INFORMATION Brand Lithofin Consistency Liquid Colour Reddish Base Type Acid Shelf Life 5 years Coverage 30-50m2 Shipping Class Dangerous Goods (Corrosive)
