The HRDI Series combines an electromechanical relay output with microcontroller timing circuitry. It offers 12 to 230V operation in five ranges and factory fixed, external, or onboard adjustable time delays with a repeat accuracy of ±0.5%. The output contact rating allows for direct operation of heavy loads, such as compressors, pumps, blower motors, heaters, etc. This series is ideal for OEM applications where cost is a factor. Operation (Interval) Upon application of input voltage, the time delay begins. The output relay is energized during the time delay. At the end of the time delay, the output de-energizes and remains de-energized until input voltage is removed. Reset: Removing input voltage resets the time delay and the output. Pre-order 6-8 Weeks Specifications Time Delay Type Microcontroller circuitry Range 0.1s - 100m in 5 adjustable ranges or fixed Repeat Accuracy ±0.5 % or 20ms, whichever is greater Tolerance (Factory Calibration) ±1%, ±5% Reset Time ≤ 150ms Time Delay vs Temp. & Voltage ≤ ±2% Input Voltage 12 or 24VDC; 24, 120, or 230VAC Tolerance 12VDC & 24VDC: -15% - 20%24 to 230VAC: -20% - 10% AC Line Frequency 50/60 Hz Power Consumption AC ≤ 4VA; DC ≤ 2W Output Type Electromechanical relay Form SPDT, non-isolated Ratings SPDT-NO SPDT-NC General Purpose 125/240VAC 30A 15A Resistive 125/240VAC 30A 15A28VDC 20A 10A Motor Load 125VAC 1 hp* 1/4 hp**240VAC 2 hp** 1 hp** Life Mechanical - 1 x 10⁶Electrical - 1 x 10⁵, *3 x 10⁴, **6,000 Protection Surge IEEE C62.41-1991 Level A Circuitry Encapsulated Dielectric Breakdown ≥ 2000V RMS terminals to mounting surface Insulation Resistance ≥ 100 MΩ Polarity DC units are reverse polarity protected Mechanical Mounting Surface mount with one #10 (M5 x 0.8) screw Dimensions H 76.7 mm (3”)W 51.3 mm (2”);D 38.1 mm (1.5”) Termination 0.25 in. (6.35 mm) male quick connect terminals Environmental Operating/Storage Temperature -40° to 60°C / -40° to 85°C Humidity 95% relative, non-condensing Weight ≅ 3.9 oz (111 g)
