The KSD1 Series features two-terminal, series-connection with the load. The KSD1 Series is an ideal choice for delay-onmake timing applications. This series is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid-state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for popular AC and DC voltages. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. Operation (Delay-on-Make) Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output. Specifications Time Delay Range 0.1s - 1000m in 6 adjustable ranges or fixed Type Microcontroller with watchdog circuitry Repeat Accuracy ±0.5% or 20ms, whichever is greater Tolerance (Factory Calibration) ≤ ± 5% Recycle Time ≤ 150ms Time Delay vs Temp. & Voltage ≤ ±10% Input Voltage 24, 120, or 230VAC; 12 or 24VDC Tolerance ±20% AC Line Frequency/DC Ripple 50/60 Hz Output Type Solid state Form NO, open during timing Maximum Load Current 1A steady state, 10A inrush at 60°C Minimum Holding Current ≤ 40mA OFF State Leakage Current ≅ 7mA @ 230VAC Voltage Drop ≅ 2.5V @ 1A Protection Polarity DC units are reverse polarity protected Circuitry Encapsulated Dielectric Breakdown ≥ 2000V RMS terminals to mounting surface Insulation Resistance ≥ 100 MΩ Mechanical Mounting Surface mount with one #10 (M5 x 0.8) screw Dimensions H 50.8 mm (2”)W 50.8 mm (2”)D 30.7 mm (1.21”) Termination 0.25 in. (6.35 mm) male quick connect terminals Environmental Operating/Storage Temperature -40° to 60°C / -40° to 85°C Humidity 95% relative, non-condensing Weight ≅ 2.4 oz (68 g)
Related
Related
Related
Related