Top Material: Solid walnut slab with poured epoxy resin fill Base: Powder-coated metal legs Construction: Single continuous pour, no joins or veneers Surface: High-gloss lacquer topcoat Customizable: Dimensions available on request Lead Time: Made to order Packaging: 1 piece per crate, foam and blanket-wrapped Each table begins as a single solid walnut slab, cut to reveal the full character of the grain beneath. The live edges of the slab are left in their natural state - the outer boundary of the wood preserved with its original irregular line. The two halves of the slab face inward, and the gap between them is filled with a poured epoxy channel that runs the full length of the table. The epoxy channel follows the contour of each slab edge, widening and narrowing as the natural wood line dictates. The resin is cast clear through to the base, the depth of the channel visible from above and from the side. Knots, burls, and grain swirls are preserved within the slab - each table carries a wood pattern that will not repeat. The high-gloss lacquer coat sits flush across the entire surface, the wood and resin reading as one continuous plane. The metal base supports the slab without competing with it - clean legs that keep the top as the only focal point in the room. Each piece is made to order. THE CONFLUENCE — Arctic Blue THE CONFLUENCE — Abyss Black THE CONFLUENCE — Emerald Channel THE CONFLUENCE — Crystal Clear THE CONFLUENCE — Obsidian
