Loctite 635 Retaining Compound

AIMS Industrial Supplies Verified independent store

→

The Loctite 635 High Strength Retaining Compound is a green, one-part, medium-viscosity anaerobic retainer for bonding close-fitting cylindrical parts. It cures between metal surfa ces to stop loosening and leakage from shock and vibration, fixtures in about 6 minutes and fills diametrical clearances up to 0.15 mm. It fluoresces under UV for bond-line checks and is tested to MIL-R-46082B. Available in 50 ml and 250 ml. Once the parts are clean and dry, apply it to suit the fit — around the pin's leading edge and inside the collar with a rotating motion for slip fits, both surfaces for press fits, or the pin with a heated collar for shrink fits — and use local heat to about 250°C to disassemble. It is not normally recommended for plastics, particularly thermoplastics, or for oxygen-rich systems and strong oxidisers. Consult the Safety Data Sheet before use. At a glance Type High-strength retaining compound Strength 20 N/mm² min. compressive shear Fixture time About 6 minutes Size 50 ml, 250 ml Colour Green (UV fluorescent) Electric motors — bonding rotors to shafts Bushings and sleeves — locking in housings and shafts Press fits — adding strength to interference fits Bearings, gears and pulleys — permanent cylindrical retention Full specifications, applications, features and important limits are in the tabs below. Frequently Asked Questions — Loctite 635 Retaining Compound What is Loctite 635 Retaining Compound used for? Electric motors — bonding rotors to shafts What strength or type is Loctite 635 Retaining Compound? Loctite 635 Retaining Compound is a 20 N/mm² min. compressive shear strength product. Show more