Free Ground ShippingWe are offering free shipping for all sizes of this product shipping to the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order. All logs move. That's why Sashco Log Builder Log Home Caulk was specifically designed to absorb all log movement. Whether it's shrinking, swelling, extreme weather or settling foundation, Sashco Log Builder Caulk moves with your home, maintaining an effective seal. Since it stretches and compresses up to 100% of the original joint size and stays rubbery, Sashco Log Builder Caulk won't crack or pull away. Instead, it creates a tight seal to keep water, dust, bugs and wind from seeping into your home. Sashco Log Builder Caulk is the smooth sealant for milled and hand-crafted log structures. Log Builder Caulk Features & Benefits• Smooth latex caulk - won't crack, peel or pull away.• Excellent elasticity, memory and adhesion.• Water-based – easy to apply and clean up.• Freeze-thaw stable. Log Builder Application Methods & Tooling• Use a caulking gun when using either the 29oz. or 10oz. cartridges of Log Builder. • When using a cartridge, cut the spout at a 45 degree angle to desired bead size. • Requires no heating prior to application, but will dispense easier when kept warm before use.• Should be tooled directly after application to ensure good adhesion and a smooth looking bead. • May be tooled with ordinary masonry-type tooling blades, a wetted finger, or a damp polyethylene foam brush. • Work the material smooth, tooling Log Builder tightly to the surfaces. Keep a rag handy for clean up. Log Builder Application Information• Sashco Log Builder Caulk can be applied when the surface temperature is 40°F - 120°F, but the ideal range is 50°F - 90°F.• If applied in temperature lower than 50°F or in humidity higher than 70%, cover the caulked areas with plastic sheeting for 3-5 days before exposure to rain. • Log Builder Caulk is paintable with latex coatings in 4 hours, with oil-based coatings in 5 days. • Cure-Through Time: 3 weeks (1/2" thickness, 70°F, 50% relative humidity).• Ideal depth for Sashco Log Builder Caulk is 1/2 of the joint width, but no less than 1/4". Sashco Log Builder Caulk ResourcesLog Builder Caulk Product GuideLog Builder Caulk SDS Sheet Example: One full gallon is sufficient material to fill a joint 1/2" wide and 3/8" deep and 102' long.Cartridges: When figuring feet per cartridge for a particular joint size divide lineal feet by 12. Clean Up• Clean excess product off surfaces (before it cures) with a putty knife and a damp rag. • Do not dispose of in drinking water supplies. Water may be used for cleaning hands, surfaces and equipment. Sashco Technical SupportIf you have questions or issues regarding the Sashco line of products, Sashco Technical Support is available at 800-767-5656.
Related
Related
Related
Related