Initiate the Clean: Low Gear Low pH Foaming Wash Engage the first stage of a truly transformative clean with Low Gear Low pH Foaming Wash – the essential priming agent for our revolutionary 2-step touchless wash method. This acidic-based formula acts as a powerful decontaminant, neutralizing alkaline residues and breaking down mineral deposits, setting the stage for an impeccably clean, touchless finish. Engineered with advanced low pH chemistry, Low Gear aggressively yet safely targets and loosens bonded mineral deposits, road salt, and hard water spots that alkaline cleaners often leave behind. It creates a vigorous, controlled foam that clings to surfaces, allowing its active ingredients to work efficiently, dissolving stubborn contamination without the need for scrubbing. As the crucial first step in our 2-step system, Low Gear prepares the vehicle's surface, ensuring maximum effectiveness of the subsequent high-pH cleaner and guaranteeing an unparalleled level of clean, shine, and clarity, all without a single touch. Key Features: Acidic Cleaning Power: Specifically formulated to neutralize alkaline films and dissolve mineral deposits and hard water spots. Optimal First Step: The critical priming agent for our 2-step touchless wash process. Effective Decontamination: Actively breaks down road salt, light rust stains, and other bonded inorganic contaminants. Vigorous Foaming Action: Produces a controlled, clinging foam for maximum dwell time and effectiveness. Prepares Surface: Creates the perfect canvas for the subsequent high-pH wash, enhancing its cleaning power. Touchless Capable: Designed to contribute to a fully touchless wash, reducing the risk of swirl marks and scratches. Rinses Clean: Leaves no residue, ensuring surfaces are perfectly prepared for the next step. Low Gear isn't just a soap; it's the strategic opening move in a detailing masterclass. Shift into 'Low Gear' and witness the pristine foundation of a truly touchless clean. Application Instructions for Low Gear Low pH Foaming Wash (First Step in 2-Step Touchless Wash) Low Gear is designed to be the first step in our recommended 2-step touchless wash method. For optimal results, ensure the vehicle is cool to the touch and out of direct sunlight. Always follow up with a high pH wash (e.g., High Gear) as the second step. Safety Precautions: Wear Gloves and Eye Protection: Always wear chemical-resistant gloves and eye protection due to the product's acidic nature. Test in Inconspicuous Area: Before widespread use, especially on delicate or sensitive surfaces, always test in a small, inconspicuous area to ensure compatibility. Do Not Let Dry: Never allow Low Gear to dry on the surface. Work in small sections and rinse thoroughly. Work on Cool Surfaces: Always apply to a cool vehicle. Avoid direct sunlight. Application Method: Foam Cannon (Recommended for 2-Step Touchless Wash) This method is crucial for optimal performance as the first step of a touchless wash, ensuring even coverage and adequate dwell time. Prepare Foam Cannon: Pour 2-4 oz (60-120ml) of Low Gear into your foam cannon reservoir. Fill the remainder of the reservoir with warm water. Adjust concentration based on the level of mineral deposits or road film (start lower and increase if needed). Apply Low Gear Foam: With your foam cannon, generously spray Low Gear foam over the entire vehicle, ensuring complete, uniform coverage of all painted surfaces, glass, and trim. Allow to Dwell: Allow the foam to dwell on the surface for 2-3 minutes. This allows the low pH formula to effectively neutralize alkaline films and dissolve mineral deposits. Crucially, do not allow the foam to dry on the vehicle. Do NOT Rinse Yet: After the dwell time, do NOT rinse Low Gear off. Proceed immediately to the second step of the touchless wash. Proceed to High pH Wash: Immediately apply your high pH foaming wash (e.g., High Gear) directly over the Low Gear foam. The two solutions will react on the surface, providing a powerful cleaning action. Tips for Best Results in a 2-Step Touchless Wash: The Power of Reaction: The effectiveness of Low Gear is maximized when it reacts with a subsequent high pH cleaner. This chemical reaction is key to breaking down various contaminants without scrubbing. Consistent Coverage: Ensure the entire vehicle is evenly covered with Low Gear foam for uniform results. Temperature Matters: Work on a cool surface. If the vehicle is hot, rinse it down thoroughly with cold water before applying Low Gear to cool it. Follow the System: For a truly touchless clean, always follow Low Gear with a high pH soap and a thorough rinse.
