Our Low Freestanding Pet Gate Panel offers a clean, modern solution for blocking openings 48" or less. The panel gates have a clear hinge in the center that makes the panel easy to store away when not in use. The 30, 32 and 36" gates have a single 18" long base. With laser cut handles to maneuver the panel, this freestanding pet gate is pure modernity. Each gate is 24" high and comes with stick on floor protectors to prevent wood floor scratching. -Note when ordering: if you want to assure that your pet will not be able to push the gate, you should order it 3-4" wider than your opening so it can be positioned against the side walls, on the same side of the doorway as the pet. The gate overlapping the sidewalls will make it difficult to push.Easy Set Up:-Slide panel into clear 18" base for the 30, 32 and 36" gates.-There are no screw holes on the panel; the screw just tighten to the panel.-Position gate on same side of room as pet.-Place gate up against threshold/door molding to prevent your pet from being able to push the gate. Included:1/4" thick acrylic panel gate.1/2" thick acrylic single base for the 30", 32" & 36" gates.Self-adhesive clear rubber feet for bottom of base for use on hardwood or tile floors. Key Features -Freestanding pet gate in 5 sizes: 30", 32"and 36" wide.-Easy set up, put panel in base and you're done.-The 30, 32 and 36" wide gates have a single, 1/2" thick lucite base that helps prevent dogs from pushing the gate.-Stick on floor protectors included.-24" high so easy to step over.-Suitable for small and medium size dogs.-Perfect for top or bottom of stairs.-Note when ordering: If you want to ensure your pet cannot push the gate open, order a gate that is 3–4 inches wider than your opening. This allows the gate to be positioned against the side walls. The overlap with the walls makes it much harder for pets to push the gate.-Can be used inside or outside.-30", 32" and 36" gates ship in 1-2 days. Size & Capacity Sizes: 30", 32" and 36" wide. Dimensions:30" Width: 30"w x 24"h x 8"d (weight: 14 lbs.)32" Width: 32"w x 24"h x 8"d (weight: 18 lbs.)36" Width: 36"w x 24"h x 8"d (weight: 20 lbs.)30", 32" & 36" gates have a single base:Base imension: 18”w x 4”h x 8”d Note: 1/4" to 1/2" tolerance is possible with dimensions and is not considered defective. Use & Care -Note when ordering: If you want to ensure your pet cannot push the gate open, order a gate that is 3–4 inches wider than your opening. This allows the gate to be positioned against the side walls. The overlap with the walls makes it much harder for pets to push the gate. 30, 32 & 36" Gate Assembly:-Place panel down into 18" base and place gate on same side of doorway as pet which prevents the pet from pushing the gate. Care Instructions:-Indoor or Outdoor Use.-Wipe with soft cloth and soapy water.-Do not use any chemical cleaners.-NOT TO BE USED AS A CHILD GATE. Assembly Instructions mportant for proper set up:The gate and base should be positioned on the same side of the doorway or opening as the pet so that the pet cannot push the gate thru the opening.Assembly Instructions for 30, 32 & 36" gates:1. Remove large acrylic panel and separate 18" base, from box.2. Place T-shape base in the center of the doorway/hall opening that you want to barricade.3. Slide large panel down into base; adjust gate as needed to adequately block your opening.
