Rockville D-MAK25 0 Gauge Marine Dual Power Amplifier Installation Kit Tinned OFC Power/Ground Wires | Marine-Grade Durability | Premium Accessories What's Included:0 AWG Tinned OFC Power Wires (Battery to Distribution Block): 2 ft Red Power Wire: Pre-installed with a ring terminal (includes washer) on one end and a crimped ferrule on the other. Heat-shrink applied on both ends and wrapped in mesh split loom (connects battery to fuse holder) 18 ft Red Power Wire: Covered in mesh split loom with a ferrule and heat shrink on one end. (Connects fuse holder to the distribution block; customizable length) 0 AWG Tinned OFC Ground Wire (Battery to Distribution Block):20 ft Black Ground Wire: Wrapped in mesh split loom, pre-installed with a ferrule and heat shrink on one end and a ring terminal (includes washer) on the other. (Connects battery ground terminal to the distribution block; customizable length)Distribution Block: Power and Ground in one chassis for easier installation: 0-gauge in, dual 4-gauge out fused power block, and ground distribution block in one chassis. (Saves time) 4 AWG Tinned OFC Wires (Distribution Block to Amplifiers): 2 x 5 ft Red Power Wires: Pre-installed with heat shrink and ferrules on both ends. Includes two extra heat shrinks, ferrules, and fork terminals for customization. Wrapped in mesh split loom. 2 x 5 ft Black Ground Wires: Pre-installed with heat shrink and ferrules on both ends. Includes two extra heat shrinks, ferrules, and fork terminals for customization. Wrapped in mesh split loom. Remote Wire:20 ft 16 AWG Remote Wire: Tinned OFC marine-grade wire with one pre-installed crimped ferrule and heat shrink. Includes one butt connector, one fork terminal, and two pieces of 16 AWG heat shrink.Additional Ferrules and Heat Shrink: 2 pcs x 0 AWG Red Ferrules 1 pc x 0 AWG Black Ferrule 6 pcs x 4 AWG Red Ferrules with Heat Shrink Additional Heat Shrinks: Extra heat shrinks for all gauge sizes Fuses: Mini ANL Fuses: 2 pcs each of 30A, 40A, 50A, 60A, 70A, 80A, 100A, and 120A ANL Fuses: 2 pcs each of 150A, 200A, 250A, and 300A Connectors: Fork Terminals: 3 pcs each of 4 AWG Red and 4 AWG Black. 16 AWG Red Fork Terminal: 1 pc. Additional Ferrules: Extra ferrules provided for customization. Rubber Grommets: 4 pcs for 4 AWG Wires. 4 pcs for 0 AWG Wires. Cable Management:16 Clear 6-Inch Zip Ties: Ensures clean and organized cable routing.Mounting Screws:Screws for the distribution block and fuse holder (nickel-plated and corrosion-resistant)Features: Marine-Grade Durability: Designed to withstand saltwater, moisture, and harsh environments. High-Quality Components: Includes tinned OFC wires, marine-grade PVC insulation, and premium fused distribution blocks for reliability. Customizable Lengths: Comes with extra ferrules, fork terminals, and heat shrink for tailored installations. Complete Kit: Everything required (except speaker and RCA wires) for a dual amplifier setup, ideal for both DIY and professional use. Specifications:Power/Ground Wires: Material: 100% Tinned Oxygen-Free Copper (OFC) Gauge: True 0 AWG Outer Diameter: 15.5 mm Strand Count: 4,753 strands of 0.12 mm wire Maximum Load: 370A @ 20 ft Jacket: Heavy-duty marine-grade PVC (waterproof and flexible) Colors: Red (Power) / Black (Ground) Why Choose the Rockville D-MAK25 Kit? Complete Solution: Provides all components to connect two amplifiers to your battery - just add appropriately sized RCA cables and speaker wire. Premium Materials: Built with tinned OFC wires and marine-grade PVC for exceptional durability. Customization Ready: Extra components for flexible configurations and installations. Unmatched Quality: Exceeds industry standards to deliver reliable performance. Marine-Specific Design: Rustproof, corrosion-resistant, and ideal for extreme environments.
