Lse9x 4l80e Shifter Bracket

Lse9x Verified independent store

→

Adapt your stock RWD E9x and E9x shifter for use on a GM 4l80e Transmission. This bracket utilizes the factory shift cable bracket (Support noise absorbing: 24517548359) and Cable retainer (Clamping parts set: 24500429180). New shift lever arm with correct geometry for matching the Park, Neutral, Reverse, D4 positions on the 4l80e Transmission.Brackets are 304 stainless steel and included hardware for attaching the shift cable bracket. Works with 1995+ 4l80e with long external shift shaft only. REQUIRED PARTS Rwd OEM linkage, verify your shift linkage matches the photos. X drive is not the same and you can swap shifters if needed.You will need figures 6, 8, 9 shown in the photo your stock shift assembly.Figure 6: Support noise absorbing: 24517548359Figure8: Clamping parts set: 24500429180Figure 9: Securing plate: 25161421252WARNING: Please be aware that with the stock shifter in the drive position, the 4l80e will be in the D4 position. Understand what is required for a 4l80e in the d4 position while holding power. Please see following link for details:https://www.sonnax.com/tech_resources/625-outsmarting-4l80-e-overdrive-roller-clutch-failure Show more