Lubricare 2 ensures automatic maintenance (cleaning and lubrication) of dental handpieces, which are essential for daily practice. Thanks to the different pre-programmed operating modes for each specific handpiece, Lubricare 2 can automatically maintain up to four handpieces in a short time. Lubricare 2 effectively removes excess oil, allowing maintenance in a short time. It cleans a turbine in approximately 20 seconds and a contra-angle handpiece in 40 seconds. Lubricare 2 is compatible with handpieces and cleaning or lubrication products from other manufacturers. Additional accessories or different spray holders may be required. Technical Data Cycle duration – 20 seconds turbine, 40 seconds’ contra-angle. Capacity – 4 ways (2 cleaning, 2 lubricating) and 1 chuck lane Rating – AC 100 V to 240 V, 50/60 Hz Power consumption – 10 VA to 25 VA Air flow rate – 60 NL/min to 100 NL/min (0.3 MPa to 0.5 MPa) Air pressure – 0.3 MPa to 0.5 MPa (recommended 0.4 MPa) Outer dimensions (WxDxH) – 300 x 300 x 365 mm Warranty – 1 year Includes 1 x Duo pack maintenance (Spraynet & Lubrifluid) Free training on the Reprocessing of Dental Handpieces PARTS & ACCESSORIES Lubrifluid REF 1600064-001 Spraynet REF 1600036-001 Absorbent door strips (5 pcs.) REF 1308446-005 Absorbent sheets for oil Lubricare 2 (5 pcs.) REF 1308452-005 Absorbent filters for oil Lubricare 1 and 2 (5 units) REF 1306003-005 Lubricare 2 handpiece coupling REF 1308451-001
